Hotfix - Cut and Paste

Published date: 2006-Jul-20
ID: DL7450124

Applies to:
AutoCAD® 2007
Autodesk® Architectural Desktop 2007
Autodesk® Civil 3D® 2007
AutoCAD® Electrical 2007
Autodesk Inventor® Professional 11
Autodesk Inventor® Series 11
Autodesk® Land Desktop 2007
AutoCAD LT® 2007
Autodesk Map® 3D 2007
AutoCAD® Mechanical 2007
Autodesk® Building Systems 2007
Autodesk® Revit® Building 9
Autodesk® Revit® Structure 3
DWG TrueConvert™

	acdb17.dll (dll - 8642Kb)
	Readme (htm - 9Kb)

This hotfix will correct a problem where cut and paste, copy and paste, block and insert, wblock and insert, and drag and drop operations fail in drawings that are saved in AutoCAD® 2000 and AutoCAD® Release 14 file formats.

If you open or create a file in AutoCAD 2007 and save it in AutoCAD 2000 or AutoCAD Release 14 file formats and then open the drawing in AutoCAD 2000, 2000i, 2002 or AutoCAD Release 14 and attempt to cut and paste, copy and paste, block and insert, wblock and insert, or drag and drop objects, then these operations will fail.

Once the hotfix is installed, drawings that are subsequently saved in AutoCAD 2000 and AutoCAD Release 14 formats will work as expected. However, drawings that were previously saved in these formats from AutoCAD 2007 will continue to have the problem unless they are resaved with the hotfix applied. The 2000 from 2007 Find Utility below can be used to help identify those drawings. If you have a large number of drawings that need to be resaved, DWG TrueConvert is a free utility that will make the job easier. Make sure you apply the hotfix to DWG TrueConvert before resaving the drawings.

	2000 from 2007 Find Utility (exe - 222Kb)
	Readme (html - 11Kb)

Give us your feedback on this document:

AUTODESK DOES NOT GUARANTEE THAT YOU WILL BE ABLE TO SUCCESSFULLY DOWNLOAD OR IMPLEMENT ANY SERVICE PACK OR WORKAROUND, OR ANY OF THE TIPS, TRICKS, EXAMPLES OR SUGGESTIONS OUTLINED IN ANY AUTODESK PRODUCT SUPPORT TECHNICAL DOCUMENTS. TECHNICAL DOCUMENTS, SERVICE PACKS AND WORKAROUNDS ARE SUBJECT TO CHANGE WITHOUT NOTICE TO YOU. AUTODESK PROVIDES TECHNICAL DOCUMENTS, SERVICE PACKS AND WORKAROUNDS "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL AUTODESK OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF DATA, OR LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, THAT MAY OCCUR AS A RESULT OF IMPLEMENTING ANY SERVICE PACK OR WORKAROUND, OR ANY SUGGESTION OUTLINED IN ANY AUTODESK PRODUCT SUPPORT TECHNICAL DOCUMENT, EVEN IF AUTODESK OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.