Autodesk Simulation Moldflow Services & Support

System requirements for Autodesk Moldflow products

This document provides the system requirements for Autodesk Moldflow® products.

System requirements for Simulation Moldflow 2014 products

For 32-bit and 64-bit Autodesk Simulation Moldflow Adviser 2014

  • 32-bit: Windows® 7 Professional, Enterprise, or Ultimate edition; or Windows® XP Professional edition (SP3) operating system
  • 64-bit: Windows® 8 operating system; Windows 7 Professional, Enterprise, or Ultimate edition; or Windows XP Professional (SP2)
  • 1 GHz CPU speed or faster
  • 2 GB RAM or higher
  • 1 GB or higher virtual memory/swap space
  • 4 GB or higher free disk space (750 MB free disk space for installation)
  • 512 MB DRAM or higher OpenGL®-capable graphics card
  • 24-bit color setting at 1,280 x 1,024 or higher screen resolution
  • Microsoft® Internet Explorer® 7.0 or higher web browser
  • Ethernet card
  • DVD-ROM drive*
  • Microsoft® Mouse-compliant pointing device
  • Adobe® Flash® Player 9
  • Internet connection for web downloads

For 32-bit and 64-bit Autodesk Simulation Moldflow Insight 2014

  • 32-bit: Windows 7 Professional, Enterprise, or Ultimate; Windows XP Professional (SP3)
  • 64-bit: Windows 8; Windows 7 Professional, Enterprise, or Ultimate; Windows XP Professional (SP2); or Windows® Server 2008 (SP1) processor
  • 2 GHz CPU speed or faster
  • 2 GB RAM or higher
  • 2 GB or higher virtual memory/swap space
  • 4 GB or higher free disk space (750 MB free disk space for installation)
  • 512 MB DRAM or higher OpenGL-capable graphics card
  • 24-bit color setting at 1,280 x 1,024 or higher screen resolution
  • Internet Explorer 7 or higher
  • Ethernet card
  • DVD-ROM drive[1]
  • Microsoft Mouse-compliant pointing device
  • Flash Player 9
  • Internet connection for web downloads

For Autodesk Simulation Moldflow Insight 2014 (64-Bit Linux) [2]

  • Red Hat® Enterprise Linux® 5 (64-bit) or Red Hat® Enterprise Linux® 6 (64-bit)
  • 1 GHz CPU speed or faster
  • 2 GB RAM or higher
  • 1 GB or higher virtual memory/swap space
  • 4 GB or higher free disk space (600 MB free disk space for installation)
  • Ethernet card
  • DVD-ROM drive[1]
  1. Simulation Moldflow is available on DVD media or electronic download. DVD-ROM drive is not required if installing using electronic download.
  2. The Autodesk Simulation Moldflow Synergy user interface is not supported on Linux platforms. Only the analysis solvers run on Linux.

System requirements for Simulation Moldflow 2013 products

For Autodesk Simulation Moldflow Adviser 2013 (32-Bit, 64-Bit)

  • 32-bit: Microsoft® Windows® 7 Professional, Enterprise, or Ultimate edition; Microsoft® Windows® XP Professional edition (SP3)
  • 64-bit: Windows 7 Professional, Enterprise, or Ultimate; Windows XP Professional (SP2)
  • 1 GHz CPU speed or faster
  • 2 GB RAM or higher
  • 1 GB or higher virtual memory/swap space
  • 4 GB or higher free disk space (750 MB free disk space for installation)
  • 512 MB DRAM or higher OpenGL®-capable graphics card
  • 24-bit color setting at 1,280 x 1,024 or higher screen resolution
  • Microsoft® Internet Explorer® 7 or higher web browser
  • Ethernet card
  • DVD-ROM drive*
  • Microsoft Mouse-compliant pointing device
  • Adobe® Flash® Player 9
  • Internet connection for web downloads

For Autodesk Simulation Moldflow Insight 2013 (32-Bit, 64-Bit)

  • 32-bit: Windows 7 Professional, Enterprise, or Ultimate; Windows XP Professional (SP3)
  • 64-bit: Windows 7 Professional, Enterprise, or Ultimate; Windows XP Professional (SP2); Microsoft® Windows® Server 2008 (SP1)
  • 2 GHz CPU speed or faster
  • 2 GB RAM or higher
  • 2 GB or higher virtual memory/swap space
  • 4 GB or higher free disk space (750 MB free disk space for installation)
  • 512 MB DRAM or higher OpenGL-capable graphics card
  • 24-bit color setting at 1,280 x 1,024 or higher screen resolution
  • Internet Explorer 7 or higher
  • Ethernet card
  • DVD-ROM drive[1]
  • Microsoft Mouse-compliant pointing device
  • Flash Player 9
  • Internet connection for web downloads

For Autodesk Simulation Moldflow Insight 2013 (64-Bit Linux)[2]

  • Red Hat® Enterprise Linux® 6 (64-bit)
  • 1 GHz CPU speed or faster
  • 2 GB RAM or higher
  • 1 GB or higher virtual memory/swap space
  • 4 GB or higher free disk space (600 MB free disk space for installation)
  • Ethernet card
  • DVD-ROM drive[1]
  1. Autodesk Simulation Moldflow is only available on DVD media or electronic download. DVD-ROM drive is not required if installing using electronic download.
  2. The Autodesk Simulation Moldflow Synergy user interface is not supported on Linux platforms. Only the analysis solvers run on Linux.

System requirements for Moldflow 2012 products

For Autodesk Moldflow Adviser 2012 (32-Bit, 64-Bit)

  • 32-bit: Windows® 7 Professional, Enterprise, Ultimate; Windows Vista® Business, Enterprise, Ultimate (SP1); Windows XP Professional (SP3)
  • 64-bit: Windows 7 Professional, Enterprise, Ultimate; Windows Vista Business, Enterprise, Ultimate (SP1); Windows XP Professional (SP2)
  • 1 GHz CPU speed or faster
  • 2 GB RAM or higher
  • 1 GB or higher of virtual memory/swap space
  • 4 GB or higher of free disk space (750 MB free disk space for installation)
  • 512 MB DRAM or higher OpenGL-capable graphics card
  • 24-bit color setting at 1,280 x 1,024 or higher screen resolution
  • Windows Internet Explorer® 7 or higher
  • Ethernet card
  • DVD-ROM drive*
  • Microsoft Mouse-compliant pointing device  
  • Adobe Flash Player 9
  • Internet connection for web downloads

For Autodesk Moldflow Insight 2012 (32-Bit, 64-Bit)

  • 32-bit: Windows 7 Professional, Enterprise, Ultimate; Windows Vista Business, Enterprise, Ultimate (SP1); Windows XP Professional (SP3)
  • 64-bit: Windows 7 Professional, Enterprise, Ultimate; Windows Vista Business, Enterprise, Ultimate (SP1); Windows XP Professional (SP2); Windows Server® 2003 (SP1); Windows Server 2008 (SP1)
  • 2 GHz CPU speed or faster
  • 2 GB RAM or higher
  • 2 GB or higher of virtual memory/swap space
  • 4 GB or higher of free disk space (750 MB free disk space for installation)
  • 512 MB DRAM or higher OpenGL-capable graphics card
  • 24-bit color setting at 1,280 x 1,024 or higher screen resolution
  • Windows Internet Explorer 7 or higher
  • Ethernet card
  • DVD-ROM drive*
  • Microsoft Mouse-compliant pointing device
  • Adobe Flash Player 9
  • Internet connection for web downloads

For Autodesk Moldflow Insight 2012 (64-Bit Linux)**

  • Red Hat® Enterprise Linux® 5 (64-bit)
  • 1 GHz CPU speed or faster
  • 2 GB RAM or higher
  • 1 GB or higher of virtual memory/swap space
  • 4 GB or higher of free disk space (600 MB free disk space for installation)
  • Ethernet card
  • DVD-ROM drive*

For Autodesk Moldflow Insight WS 2012 (32-Bit, 64-Bit)

  • 32-bit: Windows 7 Professional, Enterprise, Ultimate; Windows Vista Business, Enterprise, Ultimate (SP1); Windows XP Professional (SP3)
  • 64-bit: Windows 7 Professional, Enterprise, Ultimate; Windows Vista Business, Enterprise, Ultimate (SP1); Windows XP Professional (SP2)
  • 2 GHz CPU speed or faster
  • 32-bit: 2 GB RAM or higher
  • 64-bit: 4 GB RAM or higher
  • 4 GB or higher free disk space (2 GB free disk space for installation)
  • 512 MB DRAM or higher OpenGL-capable graphics card
  • 24-bit color setting at 1,280 x 1,024 or higher screen resolution
  • Windows Internet Explorer 7 or higher
  • Ethernet card
  • Microsoft Mouse-compliant pointing device
  • Adobe Flash player 9 or higher
  • Internet connection for web downloads

Notes:

*Autodesk Moldflow software is only available on DVD media or electronic download. DVD-ROM drive is not required if installing using electronic download.

**The Autodesk Moldflow Synergy user interface is not supported on Linux platforms.


System requirements for Moldflow 2011 products

Autodesk Moldflow Adviser 2011 (32-Bit, 64-Bit)

  • 32-bit: Windows® 7 Professional, Enterprise, Ultimate; Windows Vista® Business, Enterprise, Ultimate (SP1); Windows XP Professional (SP3)
  • 64-bit: Windows 7 Professional, Enterprise, Ultimate; Windows Vista Business, Enterprise, Ultimate (SP1); Windows XP Professional (SP2)
  • 1 GHz CPU speed or faster
  • 2 GB RAM or higher
  • 1 GB or higher of virtual memory/swap space
  • 4 GB or higher of free disk space (750 MB free disk space for installation)
  • 512 MB DRAM or higher OpenGL-capable graphics card
  • 24-bit color setting at 1,280 x 1,024 or higher screen resolution
  • Windows Internet Explorer® 7 or higher
  • Ethernet card
  • DVD-ROM drive*
  • Microsoft Mouse-compliant pointing device 
  • Adobe Flash Player 9
  • Internet connection for web downloads

Autodesk Moldflow Insight 2011 (32-Bit, 64-Bit)

  • 32-bit: Windows 7 Professional, Enterprise, Ultimate; Windows Vista Business, Enterprise, Ultimate (SP1); Windows XP Professional (SP3)
  • 64-bit: Windows 7 Professional, Enterprise, Ultimate; Windows Vista Business, Enterprise, Ultimate (SP1); Windows
  • XP Professional (SP2); Windows Server® 2003 (SP1); Windows Server 2008 (SP1)
  • 2 GHz CPU speed or faster
  • 2 GB RAM or higher
  • 2 GB or higher of virtual memory/swap space
  • 4 GB or higher of free disk space (750 MB free disk space for installation)
  • 512 MB DRAM or higher OpenGL-capable graphics card
  • 24-bit color setting at 1,280 x 1,024 or higher screen resolution
  • Windows Internet Explorer 7 or higher
  • Ethernet card
  • DVD-ROM drive*
  • Microsoft Mouse-compliant pointing device
  • Adobe Flash Player 9
  • Internet connection for web downloads

Autodesk Moldflow Insight 2011 (64-Bit Linux)**Red Hat® Enterprise Linux® 5 (64-bit)

  • 1 GHz CPU speed or faster
  • 2 GB RAM or higher
  • 1 GB or higher of virtual memory/swap space
  • 4 GB or higher of free disk space (600 MB free disk space for installation)
  • Ethernet card
  • DVD-ROM drive


System requirements for Moldflow 2010 products

Moldflow Insight 2010

For 32-Bit Autodesk Moldflow Insight 2010

  • Microsoft Windows XP Professional (SP3) or Windows Vista Business, Enterprise, or Ultimate (SP1)
  • Windows Server 2003 Standard or Enterprise (SP2)
  • 1 GB RAM (2GB recommended)
  • 2 GB of disk space (4 GB or higher recommended)500 MB virtual memory (1 GB or higher recommended)
  • 160 MB free disk space for installation
  • 512 MB graphics memory (or higher)
  • 1 GHz CPU speed (2 GHz or higher recommended)
  • 1280 x 1024 SVGA or equivalent 16 million color graphics card
  • Internet Explorer 7 or higher

For 64-Bit Autodesk Moldflow Insight 2010

  • Windows XP Professional (SP2) or Windows Vista Business, Enterprise, or Ultimate (SP1)
  • AMD or Intel x86 based 64-bit processor
  • 1 GB RAM (2GB recommended)
  • 2 GB of disk space (4 GB or higher recommended)
  • 500 MB virtual memory (1 GB or higher recommended)
  • 160 MB free disk space for installation
  • 1 GHz CPU speed (2 GHz or higher recommended)
  • 1280 x 1024 SVGA or equivalent 16 million color graphics card
  • Internet Explorer 7 or higher

For 64-bit Autodesk Moldflow Insight 2010* Linux Installations

  • SUSE Linux Enterprise Server 10 or Red Hat Enterprise Linux 4
  • AMD or Intel x86 based 64-bit processor (Intel Itanium 2 processor for Linux 4)1 GB RAM (2GB or higher recommended)
  • 500 MB virtual memory/swap space (1 GB or higher recommended)
  • 150 MB to 300 MB of memory for installation
  • 2 GB disk space (4 GB or higher recommended)
  • 500 MHz CPU (1 GHz or higher recommended)
  • 1280 x 1024 SVGA or equivalent 16 million color graphics card
  • Internet Explorer 7 or higher
    * Autodesk® Moldflow® Synergy is not supported on Linux platforms.

Moldflow Adviser 2010

For 32-Bit Autodesk Moldflow Adviser  2010

  • Microsoft Windows XP Professional (SP3) or Windows Vista Business, Enterprise, or Ultimate (SP1)
  • 10 GB of disk space1 GB of RAM (2 GB recommended)
  • 500 MB Virtual Memory (1 GB or higher recommended)
  • 160 MB free disk space for installation (175 MB for Moldflow Adviser with CAD integration)
  • 512 MB graphics memory
  • 1 GHz CPU speed
  • Open GL 1.1
  • 1280 × 1024 SVGA or equivalent 16 million color graphics card
  • Internet Explorer 7 or higher
  • Adobe Flash Player 9

For 64-Bit Autodesk Moldflow Adviser 2010

  • Windows XP Professional (SP2) or Windows Vista Business, Enterprise, or Ultimate (SP1)1 GB of RAM (2 GB recommended)10 GB of disk space 
  • 500 MB Virtual Memory (1 GB or higher recommended)
  • 160 MB free disk space for installation (175 MB for Moldflow Adviser with CAD integration)
  • 512 MB graphics memory
  • 1 GHz CPU speed
  • Open GL 1.1
  • 1280 × 1024 SVGA or equivalent 16 million color graphics card
  • Internet Explorer 7 or higher
Support – Terms of Use
AUTODESK DOES NOT GUARANTEE THAT YOU WILL BE ABLE TO SUCCESSFULLY DOWNLOAD OR IMPLEMENT ANY SERVICE PACK OR WORKAROUND, OR ANY OF THE TIPS, TRICKS, EXAMPLES OR SUGGESTIONS OUTLINED IN ANY AUTODESK PRODUCT SUPPORT TECHNICAL DOCUMENTS. TECHNICAL DOCUMENTS, SERVICE PACKS AND WORKAROUNDS ARE SUBJECT TO CHANGE WITHOUT NOTICE TO YOU. AUTODESK PROVIDES TECHNICAL DOCUMENTS, SERVICE PACKS AND WORKAROUNDS "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL AUTODESK OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF DATA, OR LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, THAT MAY OCCUR AS A RESULT OF IMPLEMENTING ANY SERVICE PACK OR WORKAROUND, OR ANY SUGGESTION OUTLINED IN ANY AUTODESK PRODUCT SUPPORT TECHNICAL DOCUMENT, EVEN IF AUTODESK OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
  • Did this page resolve your issue?
  • Translate This Page (Beta)

    Learn More about this translation beta.Page is machine translated. Learn More.

    Was this translation useful?

  • Document Information

    Published date: 2013-Mar-15
    ID: TS15720033

     

    Applies to:
    Autodesk® Simulation Moldflow Adviser Premium 2014
    Autodesk® Simulation Moldflow Adviser Premium 2013
    Autodesk® Moldflow® Adviser Manufacturing 2012
    Autodesk® Moldflow® Adviser Manufacturing 2011
    Autodesk® Moldflow® Adviser Manufacturing 2010
    Autodesk® Simulation Moldflow Adviser Standard 2014
    Autodesk® Simulation Moldflow Adviser Standard 2013
    Autodesk® Moldflow® Adviser Design 2012
    Autodesk® Moldflow® Adviser Design 2011
    Autodesk® Moldflow® Adviser Design 2010
    Autodesk® Simulation Moldflow Adviser Ultimate 2014
    Autodesk® Simulation Moldflow Adviser Ultimate 2013
    Autodesk® Moldflow® Adviser Advanced 2012
    Autodesk® Moldflow® Adviser Advanced 2011
    Autodesk® Moldflow® Adviser Advanced 2010
    Autodesk® Simulation Moldflow Insight Premium 2014
    Autodesk® Simulation Moldflow Insight Premium 2013
    Autodesk® Moldflow® Insight Performance 2012
    Autodesk® Moldflow® Insight Performance 2011
    Autodesk® Moldflow® Insight Performance 2010
    Autodesk® Simulation Moldflow Insight Standard 2014
    Autodesk® Simulation Moldflow Insight Standard 2013
    Autodesk® Moldflow® Insight Basic 2012
    Autodesk® Moldflow® Insight Basic 2011
    Autodesk® Moldflow® Insight Basic 2010
    Autodesk® Simulation Moldflow Insight Ultimate 2014
    Autodesk® Simulation Moldflow Insight Ultimate 2013
    Autodesk® Moldflow® Insight Advanced 2012
    Autodesk® Moldflow® Insight Advanced 2011
    Autodesk® Moldflow® Insight Advanced 2010
    Autodesk® Simulation Moldflow Synergy 2014
    Autodesk® Simulation Moldflow Synergy 2013
    Autodesk® Moldflow® Synergy 2012
    Autodesk® Moldflow® Synergy 2011
    Autodesk® Moldflow® Synergy 2010