Autodesk Inventor Services & Support

Operating system compatibility for Autodesk Inventor

Issue

You are wondering what operating systems are supported for the different releases of Autodesk Inventor software products.

Solution

The following tables show the supported operating systems for releases of Inventor software products:

  • Note that the abbreviation "SP" used in below tables, means “Service Pack”.
  • For graphic card information, please refer to  the certified hardware site.
  • For Inventor on the Mac, please refer to TS13578672

Inventor 2014 (current release)

OS32-bit64-bit
Windows® 8Not SupportedEnterprise,
Ultimate,
Professional,
Home Premium
Windows® 7(minimum)(recommended)
Apple®
Mac OS X®		10.6.x (via Parallels Desktop® 7.0 or Apple Boot Camp®)

Inventor 2013

OS32-bit64-bit
Windows® 7 SP1Enterprise,
Ultimate,
Professional,
Home Premium		Enterprise,
Ultimate,
Professional,
Home Premium
Windows® XPProfessional
(SP3 or later)		Professional x64 Edition
(SP2 or later)
Apple®
Mac OS X®		10.6.x (via Parallels Desktop® 7.0 or Apple Boot Camp®)

Inventor 2012

OS32-bit64-bit
Windows® 7Enterprise,
Ultimate,
Professional,
Home Premium		Enterprise,
Ultimate,
Professional,
Home Premium
Windows Vista®
(SP2 or later)		Enterprise,
Ultimate,
Business,
Home Premium,
Home Basic		Enterprise,
Ultimate,
Business,
Home Premium,
Home Basic
Windows® XPProfessional
(SP3 or later)		Professional x64 Edition
(SP2 or later)
Apple®
Mac OS X®		10.5.x (via Parallels Desktop® or Apple Boot Camp®)

Inventor 2011

OS32-bit64-bit
Windows® 7Enterprise,
Ultimate,
Professional,
Home Premium		Enterprise,
Ultimate,
Professional,
Home Premium
Windows Vista®
(SP2 or later)		Enterprise,
Ultimate,
Business,
Home Premium,
Home Basic		Enterprise,
Ultimate,
Business,
Home Premium,
Home Basic
Windows® XPProfessional
(SP3 or later)		Professional x64 Edition
(SP2 or later)
Apple®
Mac OS X®		10.5.x (via Parallels Desktop® or Apple Boot Camp®)

Inventor 2010

OS32-bit64-bit
Windows® 7Enterprise,
Ultimate,
Professional,
Home Premium		Enterprise,
Ultimate,
Professional,
Home Premium
Windows Vista®
(SP1)		Enterprise,
Ultimate,
Business,
Home Premium,
Home Basic		Enterprise,
Ultimate,
Business,
Home Premium,
Home Basic
Windows® XPProfessional
(SP3 or later)		Professional x64 Edition
(SP2 or later)
Apple®
Mac OS X®		10.5 (via Parallels Desktop® or Apple Boot Camp®)

Inventor 2009

OS32-bit64-bit
Windows Vista®
(SP1)		Enterprise,
Ultimate,
Business,
Home Premium,
Home Basic		Enterprise,
Ultimate,
Business,
Home Premium,
Home Basic
Windows® XPProfessional
(SP3 or later)		Professional x64 Edition
(SP2 or later)

Inventor 2008

OS32-bit64-bit
Windows Vista®
(SP1)		Enterprise,
Ultimate,
Business,
Home Premium,
Home Basic		Enterprise,
Ultimate,
Business,
Home Premium,
Home Basic
Windows® XPProfessional
(SP3 or later)		Professional x64 Edition
(SP2 or later)
Windows® 2000Windows® 2000
(SP4)		Not Supported

Inventor 11.5

OS32-bit64-bit
Windows® XPProfessional
(SP3 or later)		Professional x64 Edition
(SP2 or later)
Windows® 2000Windows® 2000
(SP4)		Not Supported

Inventor 11

OS32-bit64-bit
Windows® XPProfessional
(SP2)		Professional x64 Edition
(SP1)
Windows® 2000Windows® 2000
(SP4)		Not Supported

Inventor 10

OS32-bit64-bit
Windows® XPProfessional
(SP2)		Not Supported
Windows® 2000Windows® 2000
(SP4)		Not Supported

Support – Terms of Use
AUTODESK DOES NOT GUARANTEE THAT YOU WILL BE ABLE TO SUCCESSFULLY DOWNLOAD OR IMPLEMENT ANY SERVICE PACK OR WORKAROUND, OR ANY OF THE TIPS, TRICKS, EXAMPLES OR SUGGESTIONS OUTLINED IN ANY AUTODESK PRODUCT SUPPORT TECHNICAL DOCUMENTS. TECHNICAL DOCUMENTS, SERVICE PACKS AND WORKAROUNDS ARE SUBJECT TO CHANGE WITHOUT NOTICE TO YOU. AUTODESK PROVIDES TECHNICAL DOCUMENTS, SERVICE PACKS AND WORKAROUNDS "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL AUTODESK OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF DATA, OR LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, THAT MAY OCCUR AS A RESULT OF IMPLEMENTING ANY SERVICE PACK OR WORKAROUND, OR ANY SUGGESTION OUTLINED IN ANY AUTODESK PRODUCT SUPPORT TECHNICAL DOCUMENT, EVEN IF AUTODESK OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
  • Did this page resolve your issue?
  • Translate This Page (Beta)

    Learn More about this translation beta.Page is machine translated. Learn More.

    Was this translation useful?

  • Document Information

    Published date: 2013-May-16
    ID: TS14034959

     

    Applies to:
    AutoCAD® Inventor LT™ Suite 2011
    AutoCAD® Inventor LT™ Suite 2010
    AutoCAD® Inventor® Routed Systems Suite 2011
    Autodesk® Inventor® Routed Systems Suite 2009
    Autodesk® Inventor® Routed Systems Suite 2008
    AutoCAD® Inventor® Routed Systems Suite 2010
    AutoCAD® Inventor® Simulation Suite 2011
    Autodesk Inventor Simulation Suite 11
    AutoCAD® Inventor® Simulation Suite 2010
    AutoCAD® Inventor® Suite 2011
    AutoCAD® Inventor® Suite 2010
    Autodesk® Inventor® Series 2009
    Autodesk® Inventor™ Routed Systems Suite 2009
    Autodesk® Inventor™ Simulation Suite 2009
    Autodesk® Inventor™ Suite 2009
    Autodesk® Inventor™ Simulation Suite 2008
    Autodesk® Inventor™ Routed Systems Suite 2008
    Autodesk® Inventor™ Suite 2008
    Autodesk Inventor® Series 11 DWF Extension
    Autodesk Inventor® Series 11
    Autodesk Inventor® Series 10
    AutoCAD® Inventor® Tooling Suite 2011
    AutoCAD® Inventor® Tooling Suite 2010
    Autodesk® Inventor® 2014
    Autodesk® Inventor® 2013
    Autodesk® Inventor® 2012
    Autodesk® Inventor® 2011
    Autodesk® Inventor® 2010
    Autodesk® Inventor™ 2009
    Autodesk® Inventor™ 2008
    Autodesk® Inventor® Factory Advanced 2012
    Autodesk® Inventor® Factory Advanced 2011
    Autodesk® Inventor® Factory Premium 2012
    Autodesk® Inventor® Factory Premium 2011
    Autodesk® Inventor LT™ 2014
    Autodesk® Inventor LT™ 2013
    Autodesk® Inventor LT™ 2012
    Autodesk® Inventor LT™ 2011
    Autodesk® Inventor LT™ 2010
    AutoCAD® Inventor® Professional Suite 2011
    AIP 2010 with Autodesk Inventor Tooling 2010 Add-In
    AutoCAD® Inventor® Professional Suite 2010
    Autodesk® Inventor® Professional for Simulation 2009
    Autodesk® Inventor® Professional for Routed Systems 2009
    Autodesk® Inventor™ Professional 2009
    Autodesk® Inventor™ Professional 2008
    Autodesk Inventor® Professional 11 DWF Extension
    Inventor Professional for Simulation 11
    Inventor Professional for Routed Systems 11
    Autodesk Inventor® Professional 11
    Autodesk Inventor® Professional 10
    Autodesk® Inventor® Publisher 2014
    Autodesk® Inventor® Publisher 2013
    Autodesk® Inventor® Publisher 2012
    Autodesk® Inventor® Publisher 2011