Autodesk 2D and 3D Design and Engineering Software
Products
Solutions
Purchase
Support
Community
Store
Cart
Company
Contact Us
Partners
United States
Worldwide Sites
Home
Services & Support
Autodesk Inventor Services & Support
Share
Facebook
Digg
Twitter
StumbleUpon
Delicious
Autodesk Inventor Services & Support
Support
Documentation
Data & Downloads
Updates & Service Packs
Utilities & Drivers
Tools
Supplier Content Center
Sample Files
Training
Community
Consulting
Updates & Service Packs
AutoCAD® Inventor® Tooling Suite 2011
AutoCAD® Inventor® Tooling Suite 2010
AutoCAD® Inventor® Suite 2011
AutoCAD® Inventor® Suite 2010
Autodesk® Inventor® Series 2009
Autodesk® Inventor™ Routed Systems Suite 2009
Autodesk® Inventor™ Simulation Suite 2009
Autodesk® Inventor™ Suite 2009
Autodesk® Inventor™ Simulation Suite 2008
Autodesk® Inventor™ Routed Systems Suite 2008
Autodesk® Inventor™ Suite 2008
Autodesk Inventor® Series 11 DWF Extension
Autodesk Inventor® Series 11
Autodesk Inventor® Series 9
Autodesk® Inventor® 2012
Autodesk® Inventor® 2011
Autodesk® Inventor® 2010
Autodesk® Inventor™ 2009
Autodesk® Inventor™ 2008
Autodesk Inventor® 11
Autodesk® Inventor® Professional 2012
AutoCAD® Inventor® Professional Suite 2011
AutoCAD® Inventor® Professional Suite 2010
Autodesk® Inventor® Professional for Simulation 2009
Autodesk® Inventor® Professional for Routed Systems 2009
Autodesk® Inventor™ Professional 2009
Autodesk® Inventor™ Professional 2008
Autodesk Inventor® Professional 11 DWF Extension
Inventor Professional for Simulation 11
Inventor Professional for Routed Systems 11
Autodesk Inventor® Professional 11
Autodesk Mechanical Desktop 2009 (AIP - Routed Systems)
Autodesk Mechanical Desktop 2009 (AIP - Simulation)
Autodesk Mechanical Desktop 2009 (AIP)
Autodesk Mechanical Desktop 2009 (AIS)
Autodesk Mechanical Desktop 2008
Autodesk Mechanical Desktop 2008 (AIP - Simulation)
Autodesk Mechanical Desktop 2008 (AIP - Routed Systems)
Autodesk Mechanical Desktop 2008 (AIP)
Autodesk Mechanical Desktop 2008 (AIS)
Autodesk® Mechanical Desktop® 2007
Autodesk® Mechanical Desktop® 2004
Autodesk Factory Design Suite Ultimate 2012
Autodesk Factory Design Suite Advanced 2011
Autodesk Factory Design Suite Premium 2012
Autodesk Factory Design Suite Premium 2011
AutoCAD® Inventor® Tooling Suite 2011
Localization Hotfix - Unit translation (German)
UPDATED 6/30/2011 - Autodesk Inventor 2011 Subscription Advantage Pack Service Pack 2 Client Update for Autodesk Vault 2012 Server Releases
UPDATED 6/30/2011 - Autodesk Inventor 2011 Service Pack 2 Client Update for Autodesk Vault 2012 Server Releases
Hotfix - iCopy uses the wrong components to construct the assembly patterns
Hotfix - Hit entity fails when fill bend relief and causes corner to fail
Hotfix - OnPopulateFileMetadata event is needed to set FileMetaData File Location when using the Copy Components command & an unexpected exit when handling event OnFileInsertNewDialog with Shrinkwrap command
Hotfix - FileManager.GetLastActiveDesignViewRepresentation throw COMException if active view is Master
AutoCAD Mechanical 2011 Update 2
Autodesk Inventor 2011 Service Pack 2
Hotfix - iPart with linked parameter file triggers redundant prompt for Save
Hotfix - iPart with exported parameters trigger redundant prompt for Save
Autodesk IPv4 Network License Manager for Windows
Hotfix - FileMetadata.FullFileName within OnPopulateFileMetadata event does not function as expected for Make Part / Make Component
Hotfix - Unable to attach dimension to center mark
Hotfix - Apprentice API “FileManager. GetLevelOfDetailRepresentations” return different results when document is opened/closed
Hotfix - Loss of all assembly constraints when iPart is modified
Hotfix - Mass is doubled when you create a Substitute LOD
Hotfix - Tube & Pipe content can't be inserted with AIS network license
Hotfix - SurfaceEvaluator.GetParamAtPoint could not accept uninitialized GuessParams for .Net code
Hotfix - Wrong BOM quantity when QTY has units and is set to "Static Quantity"
Hotfix - Unexpected exit while hovering cursor over inserted image in drawing while using "Home" key to zoom
Hotfix - PartDocument.FileSaveCounter will be increased by one when saving a non-dirtied document.
Hotfix - Unable to balloon components promoted from table replaced iAssembly with phantom BOM structure
Hotfix - Task Scheduler ignores checked out files
Hotfix - Assembly constraints fail on folded parts
Hotfix - Unable to create work axis with point and surface
German hotfix - Correct translation issue for 2 commands in AutoCAD ® Inventor ® 2011 Ribbon interface
Hotfix - Performance and stability issue when deriving large assembly
Hotfix - Update properties returns incorrect data to the virtual components & Vault Auto-Silent Login does not work for Inventor 2011
AutoCAD Mechanical 2011 Update 1
Hotfix - Drawing annotations missing after migration to Inventor 2011
Autodesk Inventor 2011 Service Pack 1
Hotfix - iMates do not update with members after publishing iPart to Content Center
Hotfix - System instability may occur during Moldflow analysis
Hotfix - Multiple enhancements for Alias Design for Inventor (see readme)
Hotfix - Unexpected exit when rendering in Studio
Updated Certified Hardware Library
Hotfix - Bitmap in drawing is distorted in preview and not printed
Hotfix- Improving the surface patching in Alias Design Inventor add-in
Layout Viewport and Property Palette Hotfix for AutoCAD® Mechanical 2011
Hotfix: Vault dialogues appear in English on AutoCAD Inventor 2011 (Italian, Spanish, Czech and Russian languages only)
Hotfix - Moldflow add-in license needs to be updated after OS is upgraded or network card is changed
Hotfix - Multiple localization and performance issues with the Vault Add-In (To be installed in conjunction with Autodesk Vault 2011 Update 1)
Hotfix-AutoCAD Inventor 2011 Japanese Doc files
Hotfix - Inventor 2011 unexpectedly exits on feature creation
Hotfix - Change parameter value from linked Excel file does not update sketch
Hotfix - Wrong size imported for V4 model with non-mm units
Hotfix - Parameter value assigned by an iLogic rule with non-cm or non-database units may be off by a large factor. (Russian Version Only)
Hotfix - Occasional performance degradation seen with Inventor 2011 on Windows 7
Back to top
AutoCAD® Inventor® Tooling Suite 2010
UPDATED 10/27/2011 - Autodesk Inventor 2010 Service Pack 4 Client Update for Autodesk Vault 2011 Update 2 (SP2) Server Releases
Autodesk Inventor 2010 Subscription Advantage Pack Service Pack 4 Client Update for Autodesk Vault 2011 Update 2 (SP2) Server Releases
Autodesk Inventor 2010 Subscription Advantage Pack Service Pack 4 Client Update for Autodesk Vault 2012 Server Releases
Autodesk Inventor 2010 Service Pack 4 Client Update for Autodesk Vault 2012 Server Releases
Autodesk Inventor 2010 Service Pack 4 Client Update for Autodesk Vault 2011 Update 2 (SP2) Server Releases
Autodesk Inventor 2010 Service Pack 4
Hotfix - iFeatures fail after Rebuild All
Hotfix - Dimensions are disconnected from geometry when drawing opened
Hotfix - Unexpected exit after using Split command followed by other operations on part body
Hotfix - Unexpected exit when iFeature Catalog folder contains more than 2000 files
Hotfix - Linked files are not located in Content Center libraries automatically
Hotfix - Unexpected exit when Taper thread hole made with Inventor 11 is edited with Inventor 2010
Hotfix - Inventor 2010 unexpectedly exits when opening migrated Inventor R11 IDW's
Autodesk IPv4 Network License Manager for Windows
Hotfix - Export to PDF creates unreadable font characters
Hotfix - iFeature errors with some features on recompute
Hotfix - Refresh From Vault overwrites locally saved files (For use with Autodesk Vault 2011)
Hotfix - Content Center ownership transfers replicated in Autodesk Vault Collaboration 2011 are not seen
Hotfix - FileAccessEvents.OnFileResolution::RelativeFileName returns incorrect results
Hotfix - PartDocument.FileSaveCounter will be increased by one when saving a non-dirtied document
Hotfix - Character “$” is invalid in Content Center file name or folder name
Hotfix - Refresh From Vault overwrites locally saved files
Hotfix - Thread properties do not map properly when published to Content Center
Hotfix - iFeature insert dialog will show "Create Package" instead of description of iFeature
Hotfix - Unexpected exit when rendering on multicore machine
Hotfix - Multiple issues addressed, see description and readme file for details
Hotfix - The property "ReferencedDocumentDescriptors" of substitute cannot be read
Hotfix - Unexpected exit when saving a drawing where references have been replaced
Hotfix - Unexpected exit when inserting a "Feature control frame" (see readme) & Updating a drawing document with replaced references may cause instability in invisible mode
Hotfix - Slow performance when moving imported logo in a 2D sketch
Hotfix - Unexpected exit when the profile is changed to a different standard or profile type
Hotfix - Mapping a custom property to a Content Center template parameter may cause existing parameter mapping to be lost
Hotfix - Two Bend Notes for same bend line - one shows "Up" the other shows "Down"
Hotfix - Reflections in drawings cannot be disabled
Hotfix - VBA editor needs to be invoked upfront to improve VBA macro performance
Hotfix - Detail View of Aligned Section View loses data
Hotfix - Content Center appears empty until log out / login
Hotfix - Unexpected exit when the Chamfer/Fillet feature recomputes with an unstable edge
Hot fix -Certain parts with Fold features can’t be converted to Sheet Metal on AutoCAD Inventor 2010 Spanish and Italian
Hotfix - Constraint failures after suppressing occurrences or activating subassembly substitute
AutoCAD Mechanical 2010 Update 2
Hotfix - Lost functionality of attaching symbols to Ordinate Dimension Set
Autodesk Inventor 2010 Subscription Advantage Pack Service Pack 3 Client Update for Autodesk Vault 2011 Update 1 (SP1) Server Releases
Autodesk Inventor 2010 Service Pack 3 Client Update for Autodesk Vault 2011 Update 1 (SP1) Server Releases
Autodesk Inventor 2010 Service Pack 3
Hotfix - Exporting Inventor DWG file to Native AutoCAD Format explodes hatching
Hotfix - Performance issue when publishing DWF files from an assembly with Shrinkwrap LOD
Autodesk IPv6 Network License Manager for Windows
Hotfix - Inventor unexpectedly exits when switching LOD
Hotfix - Create some GOST symbols will cause the action "Zoom All" in Russian Inventor 2010
Hotfix - User needs the ability to set a different unit as "cm" for sheet metal properties
Hotfix - Flat pattern user parameters won't update into custom properties
Autodesk Inventor 2010 Service Pack 2
Hotfix - Inventor 2010 Vault Add-In functionality for locked files is affected by ADMS2010 Update 1 installation
Hotfix - Service Pack 1 license borrowing and Communication Center Service Pack 1 recognition
Hotfix - Locked file Icon not visibile(please reference Autodesk Vault 2010 Update 1), Option buttons are grayed out when exporting as other format & slow browsing performance in OpenFromVault
Hotfix - Inventor 2010 SP1 unexpectedly exits when saving dwg with a "Iso Top Left" view
Hotfix - Assembly features in iAssembly factory become suppressed after migration
Hotfix - Refresh Standard Components command reverts instances defined length to default length
Update to documentation included in Inventor 2010 regarding Network License Support.
Autodesk Inventor Tooling 2010 Service Pack 1
AutoCAD Mechanical 2010 Update 1
Hotfix - Importing dxf shapes containing splines in Inventor results in bad shapes
Hotfix - Ribbon language will use operating system installed language instead of product language
Hotfix - Added feature creates a phantom web
Hotfix - BindKeyToInterface failed using Apprentice API
Hotfix - Inventor hangs on creating any ESKD symbol on a pattern of rectangles
FLEXnet Licensing Hotfix for 64-bit Windows
Register Today Proxy Licensing Hotfix
Hotfix - Mass properties not accurate when base feature is modified
Hotfix - When exporting to STL file data is not displayed correctly
Hotfix - Unprintable characters appear in the menus and tooltips
Hotfix - Dimension tolerances change unexpectedly when method is changed
Localization AutoCAD Mechanical Hotfix for Italian and Chinese Simplified
Localization Hotfix - localized AutoCAD commands are not recognized in the first attempt
Hotfix - Exported ADSK files cause unexpected exit of Revit
Hotfix - Non-English Local fonts are not working when exporting to PDF
Back to top
AutoCAD® Inventor® Suite 2011
Hotfix - Projected edge will not select as a closed loop for offset
Hotfix - OnFileDirty fires for sub-assembly when update top assembly, however the sub-assembly is not dirty
Localization Hotfix - Unit translation (German)
Hotfix - Update properties returns incorrect data to the virtual components & Vault Auto-Silent Login does not work for Inventor 2011 after installation of Service Pack 2
Hotfix - Corner error when creating flat pattern
Hotfix - OnPopulateFileMetadata for instances from same file not functioning properly
Hotfix - Unexpected exit when editing 3D sketch & Unexpected exit on close of error dialog from applying bend command
Hotfix - Merged eccentric frame generator beams report wrong beam length
UPDATED 6/30/2011 - Autodesk Inventor 2011 Subscription Advantage Pack Service Pack 2 Client Update for Autodesk Vault 2012 Server Releases
UPDATED 6/30/2011 - Autodesk Inventor 2011 Service Pack 2 Client Update for Autodesk Vault 2012 Server Releases
Hotfix - iCopy uses the wrong components to construct the assembly patterns
Hotfix - Hit entity fails when fill bend relief and causes corner to fail
Hotfix - OnPopulateFileMetadata event is needed to set FileMetaData File Location when using the Copy Components command & an unexpected exit when handling event OnFileInsertNewDialog with Shrinkwrap command
Hotfix - FileManager.GetLastActiveDesignViewRepresentation throw COMException if active view is Master
AutoCAD Mechanical 2011 Update 2
Autodesk Inventor 2011 Service Pack 2
Hotfix - iPart with linked parameter file triggers redundant prompt for Save
Hotfix - iPart with exported parameters trigger redundant prompt for Save
Autodesk IPv4 Network License Manager for Windows
Hotfix - FileMetadata.FullFileName within OnPopulateFileMetadata event does not function as expected for Make Part / Make Component
Hotfix - Unable to attach dimension to center mark
Hotfix - Apprentice API “FileManager. GetLevelOfDetailRepresentations” return different results when document is opened/closed
Hotfix - Loss of all assembly constraints when iPart is modified
Hotfix - Mass is doubled when you create a Substitute LOD
Hotfix - Tube & Pipe content can't be inserted with AIS network license
Hotfix - SurfaceEvaluator.GetParamAtPoint could not accept uninitialized GuessParams for .Net code
Hotfix - Wrong BOM quantity when QTY has units and is set to "Static Quantity"
Hotfix - Unexpected exit while hovering cursor over inserted image in drawing while using "Home" key to zoom
Hotfix - PartDocument.FileSaveCounter will be increased by one when saving a non-dirtied document.
Hotfix - Unable to balloon components promoted from table replaced iAssembly with phantom BOM structure
Hotfix - Task Scheduler ignores checked out files
Hotfix - Assembly constraints fail on folded parts
Hotfix - Unable to create work axis with point and surface
German hotfix - Correct translation issue for 2 commands in AutoCAD ® Inventor ® 2011 Ribbon interface
Hotfix - Performance and stability issue when deriving large assembly
Hotfix - Update properties returns incorrect data to the virtual components & Vault Auto-Silent Login does not work for Inventor 2011
AutoCAD Mechanical 2011 Update 1
Hotfix - Drawing annotations missing after migration to Inventor 2011
Autodesk Inventor 2011 Service Pack 1
Hotfix - iMates do not update with members after publishing iPart to Content Center
Hotfix - Multiple enhancements for Alias Design for Inventor (see readme)
Hotfix - Unexpected exit when rendering in Studio
Updated Certified Hardware Library
Hotfix - Bitmap in drawing is distorted in preview and not printed
Hotfix- Improving the surface patching in Alias Design Inventor add-in
Layout Viewport and Property Palette Hotfix for AutoCAD® Mechanical 2011
Hotfix: Vault dialogues appear in English on AutoCAD Inventor 2011 (Italian, Spanish, Czech and Russian languages only)
Hotfix - Multiple localization and performance issues with the Vault Add-In (To be installed in conjunction with Autodesk Vault 2011 Update 1)
Hotfix-AutoCAD Inventor 2011 Japanese Doc files
Hotfix - Inventor 2011 unexpectedly exits on feature creation
Hotfix - Change parameter value from linked Excel file does not update sketch
Hotfix - Wrong size imported for V4 model with non-mm units
Hotfix - Parameter value assigned by an iLogic rule with non-cm or non-database units may be off by a large factor. (Russian Version Only)
Hotfix - Occasional performance degradation seen with Inventor 2011 on Windows 7
Autodesk IPv6 Network License Manager for Windows
Back to top
AutoCAD® Inventor® Suite 2010
Hotfix - Unexpected exit when inserting surface annotation
Hotfix - OnFileDirty fires for sub-assembly when update top assembly, however the sub-assembly is not dirty
Hotfix - Failure of occurence.name setting value after occurence.replace
Hotfix - Manipulating 3D sketch causes file size to increase
UPDATED 10/27/2011 - Autodesk Inventor 2010 Service Pack 4 Client Update for Autodesk Vault 2011 Update 2 (SP2) Server Releases
Hotfix - Degree Of Freedom displays incorrectly for grounded part, Design Views not honored & stability enhancements
Hotfix - Custom thread designation for assembly feature lost after derived & stablity enhancement
Autodesk Inventor 2010 Subscription Advantage Pack Service Pack 4 Client Update for Autodesk Vault 2011 Update 2 (SP2) Server Releases
Autodesk Inventor 2010 Subscription Advantage Pack Service Pack 4 Client Update for Autodesk Vault 2012 Server Releases
Autodesk Inventor 2010 Service Pack 4 Client Update for Autodesk Vault 2012 Server Releases
Autodesk Inventor 2010 Service Pack 4 Client Update for Autodesk Vault 2011 Update 2 (SP2) Server Releases
Autodesk Inventor 2010 Service Pack 4
Hotfix - iFeatures fail after Rebuild All
Hotfix - Dimensions are disconnected from geometry when drawing opened
Hotfix - Unexpected exit after using Split command followed by other operations on part body
Hotfix - Unexpected exit when iFeature Catalog folder contains more than 2000 files
Hotfix - Linked files are not located in Content Center libraries automatically
Hotfix - Unexpected exit when Taper thread hole made with Inventor 11 is edited with Inventor 2010
Hotfix - Inventor 2010 unexpectedly exits when opening migrated Inventor R11 IDW's
Autodesk IPv4 Network License Manager for Windows
Hotfix - Export to PDF creates unreadable font characters
Hotfix - iFeature errors with some features on recompute
Hotfix - Refresh From Vault overwrites locally saved files (For use with Autodesk Vault 2011)
Hotfix - Content Center ownership transfers replicated in Autodesk Vault Collaboration 2011 are not seen
Hotfix - FileAccessEvents.OnFileResolution::RelativeFileName returns incorrect results
Hotfix - PartDocument.FileSaveCounter will be increased by one when saving a non-dirtied document
Hotfix - Character “$” is invalid in Content Center file name or folder name
Hotfix - Refresh From Vault overwrites locally saved files
Hotfix - Thread properties do not map properly when published to Content Center
Hotfix - iFeature insert dialog will show "Create Package" instead of description of iFeature
Hotfix - Unexpected exit when rendering on multicore machine
Hotfix - Multiple issues addressed, see description and readme file for details
Hotfix - The property "ReferencedDocumentDescriptors" of substitute cannot be read
Hotfix - Unexpected exit when saving a drawing where references have been replaced
Hotfix - Unexpected exit when inserting a "Feature control frame" (see readme) & Updating a drawing document with replaced references may cause instability in invisible mode
Hotfix - Slow performance when moving imported logo in a 2D sketch
Hotfix - Unexpected exit when the profile is changed to a different standard or profile type
Hotfix - Mapping a custom property to a Content Center template parameter may cause existing parameter mapping to be lost
Hotfix - Two Bend Notes for same bend line - one shows "Up" the other shows "Down"
Hotfix - Reflections in drawings cannot be disabled
Hotfix - VBA editor needs to be invoked upfront to improve VBA macro performance
Hotfix - Detail View of Aligned Section View loses data
Hotfix - Content Center appears empty until log out / login
Hotfix - Unexpected exit when the Chamfer/Fillet feature recomputes with an unstable edge
Hot fix -Certain parts with Fold features can’t be converted to Sheet Metal on AutoCAD Inventor 2010 Spanish and Italian
Hotfix - Constraint failures after suppressing occurrences or activating subassembly substitute
AutoCAD Mechanical 2010 Update 2
Hotfix - Lost functionality of attaching symbols to Ordinate Dimension Set
Autodesk Inventor 2010 Subscription Advantage Pack Service Pack 3 Client Update for Autodesk Vault 2011 Update 1 (SP1) Server Releases
Autodesk Inventor 2010 Service Pack 3 Client Update for Autodesk Vault 2011 Update 1 (SP1) Server Releases
Autodesk Inventor 2010 Service Pack 3
Hotfix - Exporting Inventor DWG file to Native AutoCAD Format explodes hatching
Autodesk IPv6 Network License Manager for Windows
Hotfix - Inventor unexpectedly exits when switching LOD
Hotfix - Create some GOST symbols will cause the action "Zoom All" in Russian Inventor 2010
Hotfix - User needs the ability to set a different unit as "cm" for sheet metal properties
Hotfix - Flat pattern user parameters won't update into custom properties
Autodesk Inventor 2010 Service Pack 2
Hotfix - Inventor 2010 Vault Add-In functionality for locked files is affected by ADMS2010 Update 1 installation
Hotfix - Service Pack 1 license borrowing and Communication Center Service Pack 1 recognition
Hotfix - Locked file Icon not visibile(please reference Autodesk Vault 2010 Update 1), Option buttons are grayed out when exporting as other format & slow browsing performance in OpenFromVault
hotfix to address Ribbon UI translation quality issue in AutoCAD Inventor 2010 for Polish
Hotfix - Inventor 2010 SP1 unexpectedly exits when saving dwg with a "Iso Top Left" view
Hotfix - Assembly features in iAssembly factory become suppressed after migration
Hotfix - Refresh Standard Components command reverts instances defined length to default length
Update to documentation included in Inventor 2010 regarding Network License Support.
Autodesk Inventor 2010 Service Pack 1
AutoCAD Mechanical 2010 Update 1
Hotfix - Importing dxf shapes containing splines in Inventor results in bad shapes
Hotfix - Ribbon language will use operating system installed language instead of product language
Hotfix - Added feature creates a phantom web
Hotfix - BindKeyToInterface failed using Apprentice API
Hotfix - Inventor hangs on creating any ESKD symbol on a pattern of rectangles
FLEXnet Licensing Hotfix for 64-bit Windows
Register Today Proxy Licensing Hotfix
Hotfix - When exporting to STL file data is not displayed correctly
Hotfix - Unprintable characters appear in the menus and tooltips
Hotfix - Dimension tolerances change unexpectedly when method is changed
Localization AutoCAD Mechanical Hotfix for Italian and Chinese Simplified
Localization Hotfix - localized AutoCAD commands are not recognized in the first attempt
Startup Error and Text Editing Hotfix
MeasureGeom Hotfix
Hotfix: Link in AutoCAD Inventor 2010 tutorial doesn't work(CHS only)
Hotfix - Exported ADSK files cause unexpected exit of Revit
Hotfix - Non-English Local fonts are not working when exporting to PDF
Back to top
Autodesk® Inventor® Series 2009
Hotfix - Resolving GOST Issues (Russian only)
Hotfix - Resolving the "Surface Texture" under "_amsurfsym" command issue (Polish only)
Hotfix - Resolving the "Surface Texture" under "_amsurfsym" command issue (Simplified Chinese only)
Render Hotfix
Hotfix - OptionKey issues on Autodesk Mechanical Desktop 2009 - Japanese, Traditional Chinese, Simplified Chinese and Korean
Back to top
Autodesk® Inventor™ Routed Systems Suite 2009
Hotfix - Performance deteriorates on insert of drawing annotation
Hotfix - 32-bit host error message on file open
Hotfix - Idrop does not work correctly when use CC part on mirrored feature or in ipart
Hotfix - Custom frame iProperties are not updated after change command
Hotfix - Exporting a monochromatic DWF is not available
Hotfix - Rebuild All will fail with Extrusion
Hotfix - The setting of "Defer Updates" of idw file becomes invalid when "Open From Vault"
Hotfix - When migrating an Inventor 11 library some families get faulty names
Hotfix - Deleting one segment of a 3D-sketch will corrupt workfeature (axis)
Hotfix - After migrating drawings the # of holes will not be displayed correctly
Hotfix - When opening placed iPart members an Error "Save method of Workbook class failed"
Hotfix - Inventor unexpectedly exits while publishing DWF with model containing weld
Hotfix - Inventor unexpectedly exits when saving a file
Hotfix - Dimension tolerances change unexpectedly when method is changed
Hotfix - Importing dxf shapes containing splines in Inventor results in bad shapes
Service Pack 3 Hotfix
Autodesk Mechanical Desktop 2009 Service Pack 3
AutoCAD Mechanical 2009 Service Pack 3
Autodesk Inventor 2009 Service Pack 2
Inventor 2009 Service Pack 2 Client Update for Autodesk Data Management Server (ADMS) 2010
Hotfix - Contains multiple fixes for various issues (see readme files for details)
Inventor 2009 Subscription Bonus Pack Client Update for Autodesk Data Management Server (ADMS) 2010
Inventor 2009 Service Pack 1 Client Update for Autodesk Data Management Server (ADMS) 2010
Hotfix - Fixes an issue where the UI does not update or truncates toolbar icons and menu items
Hotfix - Fixes an issue where Inventor unexpectedly exits while importing Mechanical Desktop files
Hotfix - Fixes issue where custom library is missing data after migration from ADMS 2008 to 2009
Hotfix - Fixes an issue where a model error occurs on view after upgrade from Inventor 2008 to 2009
Hotfix - Fixes an issue where changing the assy LOD does not change the embedded sub-assy LOD
Hotfix - Runtime error & crash in Content Center after switching restricted user accounts
Hotfix - Fixes the issue where Inventor occasionally fails to exit cleanly after having used Vault
Hotfix - Redundant License Server
Hotfix - Fixes an issue where Inventor prematurely exits on close (CER)
Hotfix-content center files cannot be opened after copy design (ESP)
Hotfix-content center files cannot be opened after copy design (FRA)
Hotfix - Fixes the issue where iParts driven by parameters do not place correctly
Hotfix - Fixes the issue of the lowest pitch size selected by default for metric tapped holes
AutoCAD Mechanical 2009 Service Pack 2
Autodesk Mechanical Desktop 2009 Service Pack 2
Hotfix - Unit translation issue in Autodesk Inventor 2009 for Korean
Hotfix - Fixes the issue where hole edges turn to B-splines when migrating R11 drawings to R2009.
Hotfix: "Inventor Not Responding in Design Accelerator" in Autodesk® Inventor™ 2009 German 64 bit
Autodesk Inventor 2009 Service Pack 1
Hotfix-content center files cannot be opened after copy design (ITA)
AutoCAD Mechanical 2009 Service Pack 1
Autodesk Mechanical Desktop 2009 Service Pack 1
Hotfix - Harness Data importing issue in Autodesk Inventor 2009 (French)
Hotfix - Resolving the "Surface Texture" under "_amsurfsym" command issue (Polish only)
Hotfix - Resolve missing up and down arrow buttons in Content Center Editor (Korean only)
Hotfix - Check In progress bar does not get closed when checking in a drawing with DWF Publish
Hotfix - Content Center configuration dialog may fail to invoke after R11 migration
Hotfix - Difficulties migrating older Presentation (.ipn) files to Inventor R2009
Hotfix - Inventor DWG files have problems after check-in using an Inventor shared project
German Hotfix - Inventor 2009 Hotfix for Representation Views error
Traditional Chinese Hotfix - Content Center Library update issue in Inventor 2009 for Inventor 11 Service Pack Client Upgrade for ADMS 2009
Hotfix - Object Property Settings drawing proportion issue on ACM and MDT 2009 - Japenese
Hotfix - Localization update for Chinese GB Families in Content
Hotfix - Fixes the API issue of OnNewView event not being raised sporadically
Hotfix - Unable to locate model geometry (Face) curves in cut view
Back to top
Autodesk® Inventor™ Simulation Suite 2009
Hotfix - Performance deteriorates on insert of drawing annotation
Hotfix - 32-bit host error message on file open
Hotfix - Idrop does not work correctly when use CC part on mirrored feature or in ipart
Hotfix - Custom frame iProperties are not updated after change command
Hotfix - Exporting a monochromatic DWF is not available
Hotfix - Rebuild All will fail with Extrusion
Hotfix - The setting of "Defer Updates" of idw file becomes invalid when "Open From Vault"
Hotfix - When migrating an Inventor 11 library some families get faulty names
Hotfix - Deleting one segment of a 3D-sketch will corrupt workfeature (axis)
Hotfix - After migrating drawings the # of holes will not be displayed correctly
Hotfix - When opening placed iPart members an Error "Save method of Workbook class failed"
Hotfix - Inventor unexpectedly exits while publishing DWF with model containing weld
Hotfix - Inventor unexpectedly exits when saving a file
Hotfix - Dimension tolerances change unexpectedly when method is changed
Hotfix - Importing dxf shapes containing splines in Inventor results in bad shapes
Service Pack 3 Hotfix
Autodesk Mechanical Desktop 2009 Service Pack 3
AutoCAD Mechanical 2009 Service Pack 3
Autodesk Inventor 2009 Service Pack 2
Inventor 2009 Service Pack 2 Client Update for Autodesk Data Management Server (ADMS) 2010
Hotfix - Contains multiple fixes for various issues (see readme files for details)
Inventor 2009 Subscription Bonus Pack Client Update for Autodesk Data Management Server (ADMS) 2010
Inventor 2009 Service Pack 1 Client Update for Autodesk Data Management Server (ADMS) 2010
Hotfix - Fixes an issue where the UI does not update or truncates toolbar icons and menu items
Hotfix - Fixes an issue where Inventor unexpectedly exits while importing Mechanical Desktop files
Hotfix - Fixes issue where custom library is missing data after migration from ADMS 2008 to 2009
Hotfix - Fixes an issue where a model error occurs on view after upgrade from Inventor 2008 to 2009
Hotfix - Fixes an issue where changing the assy LOD does not change the embedded sub-assy LOD
Hotfix - Runtime error & crash in Content Center after switching restricted user accounts
Hotfix-content center files cannot be opened after copy design (PLK)
Hotfix-content center files cannot be opened after copy design (RUS)
Hotfix-content center files cannot be opened after copy design (CSY)
Hotfix-content center files cannot be opened after copy design (DEU)
Hotfix - Fixes the issue where Inventor occasionally fails to exit cleanly after having used Vault
Hotfix - Redundant License Server
Hotfix - Fixes an issue where Inventor prematurely exits on close (CER)
Hotfix-content center files cannot be opened after copy design (ESP)
Hotfix-content center files cannot be opened after copy design (FRA)
Hotfix - Fixes the issue where iParts driven by parameters do not place correctly
Hotfix - Fixes the issue of the lowest pitch size selected by default for metric tapped holes
AutoCAD Mechanical 2009 Service Pack 2
Autodesk Mechanical Desktop 2009 Service Pack 2
Hotfix - Unit translation issue in Autodesk Inventor 2009 for Korean
Hotfix - Fixes the issue where hole edges turn to B-splines when migrating R11 drawings to R2009.
Hotfix: "Inventor Not Responding in Design Accelerator" in Autodesk® Inventor™ 2009 German 64 bit
Autodesk Inventor 2009 Service Pack 1
Hotfix-content center files cannot be opened after copy design (ITA)
AutoCAD Mechanical 2009 Service Pack 1
Autodesk Mechanical Desktop 2009 Service Pack 1
Hotfix - Resolving the "Surface Texture" under "_amsurfsym" command issue (Polish only)
Hotfix - Resolve missing up and down arrow buttons in Content Center Editor (Korean only)
Hotfix - Check In progress bar does not get closed when checking in a drawing with DWF Publish
Hotfix - Content Center configuration dialog may fail to invoke after R11 migration
Hotfix - Difficulties migrating older Presentation (.ipn) files to Inventor R2009
Hotfix - Inventor DWG files have problems after check-in using an Inventor shared project
German Hotfix - Inventor 2009 Hotfix for Representation Views error
Traditional Chinese Hotfix - Content Center Library update issue in Inventor 2009 for Inventor 11 Service Pack Client Upgrade for ADMS 2009
Hotfix - Object Property Settings drawing proportion issue on ACM and MDT 2009 - Japenese
Hotfix - Localization update for Chinese GB Families in Content
Hotfix - Fixes the API issue of OnNewView event not being raised sporadically
Hotfix - Unable to locate model geometry (Face) curves in cut view
Back to top
Autodesk® Inventor™ Suite 2009
Hotfix - Error in drawing Section view after model update
Hotfix - Performance deteriorates on insert of drawing annotation
Hotfix - 32-bit host error message on file open
Hotfix - Idrop does not work correctly when use CC part on mirrored feature or in ipart
Hotfix - Custom frame iProperties are not updated after change command
Hotfix - Exporting a monochromatic DWF is not available
Hotfix - Rebuild All will fail with Extrusion
Hotfix - The setting of "Defer Updates" of idw file becomes invalid when "Open From Vault"
Hotfix - When migrating an Inventor 11 library some families get faulty names
Hotfix - Deleting one segment of a 3D-sketch will corrupt workfeature (axis)
Hotfix - Inventor unexpectedly exits while publishing DWF with model containing weld
Hotfix - Inventor unexpectedly exits when saving a file
Hotfix - Dimension tolerances change unexpectedly when method is changed
Hotfix - Importing dxf shapes containing splines in Inventor results in bad shapes
Service Pack 3 Hotfix
Autodesk Mechanical Desktop 2009 Service Pack 3
AutoCAD Mechanical 2009 Service Pack 3
Autodesk Inventor 2009 Service Pack 2
Inventor 2009 Service Pack 2 Client Update for Autodesk Data Management Server (ADMS) 2010
Hotfix - Contains multiple fixes for various issues (see readme files for details)
Inventor 2009 Subscription Bonus Pack Client Update for Autodesk Data Management Server (ADMS) 2010
Inventor 2009 Service Pack 1 Client Update for Autodesk Data Management Server (ADMS) 2010
Hotfix - Fixes an issue where the UI does not update or truncates toolbar icons and menu items
Hotfix - Fixes an issue where Inventor unexpectedly exits while importing Mechanical Desktop files
Hotfix - Fixes issue where custom library is missing data after migration from ADMS 2008 to 2009
Hotfix - Fixes an issue where a model error occurs on view after upgrade from Inventor 2008 to 2009
Hotfix - Autodesk Activation Update
Hotfix - Fixes an issue where changing the assy LOD does not change the embedded sub-assy LOD
Hotfix - Runtime error & crash in Content Center after switching restricted user accounts
Hotfix-content center files cannot be opened after copy design (PLK)
Hotfix-content center files cannot be opened after copy design (RUS)
Hotfix-content center files cannot be opened after copy design (CSY)
Hotfix-content center files cannot be opened after copy design (DEU)
Hotfix - Fixes the issue where Inventor occasionally fails to exit cleanly after having used Vault
Hotfix - Redundant License Server
Hotfix - Fixes an issue where Inventor prematurely exits on close (CER)
Hotfix-content center files cannot be opened after copy design (ESP)
Hotfix-content center files cannot be opened after copy design (FRA)
Hotfix - Fixes the issue where iParts driven by parameters do not place correctly
Hotfix - Fixes the issue of the lowest pitch size selected by default for metric tapped holes
AutoCAD Mechanical 2009 Service Pack 2
Autodesk Mechanical Desktop 2009 Service Pack 2
Hotfix - Unit translation issue in Autodesk Inventor 2009 for Korean
Hotfix - Fixes the issue where hole edges turn to B-splines when migrating R11 drawings to R2009.
Hotfix: "Inventor Not Responding in Design Accelerator" in Autodesk® Inventor™ 2009 German 64 bit
Autodesk Inventor 2009 Service Pack 1
WAN Acceleration 2009 Hotfix
Open Close Save Hotfix
Hotfix-content center files cannot be opened after copy design (ITA)
AutoCAD Mechanical 2009 Service Pack 1
Autodesk Mechanical Desktop 2009 Service Pack 1
Hotfix - Resolve missing up and down arrow buttons in Content Center Editor (Korean only)
Hotfix - Check In progress bar does not get closed when checking in a drawing with DWF Publish
Hotfix - Content Center configuration dialog may fail to invoke after R11 migration
Hotfix - Difficulties migrating older Presentation (.ipn) files to Inventor R2009
Hotfix - Inventor DWG files have problems after check-in using an Inventor shared project
German Hotfix - Inventor 2009 Hotfix for Representation Views error
Traditional Chinese Hotfix - Content Center Library update issue in Inventor 2009 for Inventor 11 Service Pack Client Upgrade for ADMS 2009
Hotfix - Sheet Metal Mirror/Pattern issues in Chinese version only of Inventor 2009
Hotfix - Object Property Settings drawing proportion issue on ACM and MDT 2009 - Japenese
Hotfix - Localization update for Chinese GB Families in Content
Hotfix - Fixes the API issue of OnNewView event not being raised sporadically
Hotfix - Unable to locate model geometry (Face) curves in cut view
Back to top
Autodesk® Inventor™ Simulation Suite 2008
Hotfix - Some styles are not effective in Sheet Metal Styles of Inventor 2008
Hotfix - C++ project for Publishing DWF will reset the options in UI
Hotfix - Invalid reference to segment object used error when IDW is opened
Hotfix - large file size after everything is deleted
Hotfix - Virtual Component iProperties are not updated properly
Inventor 2008 Service Pack 3 Client Update for Autodesk Data Management Server (ADMS) 2010
Hotfix - Hole edges turn to a B-spline when migrating the files from version 11
Hotfix - Fixes an issue where a derived part in an assembly becomes dirty after unsurpressing link
Hotfix - Fixes issue where the wrong thread feature color is displayed in Design Review
Hotfix - Drawing dimensions and title block text are lost when publishing to DWF
Hotfix - Part with exported parameters is prompted to Save when inserted into assembly
Hotfix - Cannot place instanced CC part for user "B" if part is checked out of the Vault by user "A"
Hotfix – Resolving issues with export of part list to Excel in AutoCAD Mechanical 2008 SP2 and Mechanical Desktop 2008 SP2
Hotfix - Thread class type is not shown correctly when the thread type is changed
Hotfix - Corrupt DXFOUT translation of hole note text and leader created in Break view
Hotfix - Angular dimensions w/tolerances created in a model are not promoted to the drawing correctly
Inventor 2008 Service Pack 3 Client Update for Autodesk Data Management Server (ADMS) 2009
Autodesk Inventor 2008 Service Pack 3
Inventor 2008 Service Pack 2 Client Upgrade for Autodesk Data Management Server (ADMS) 2009
Autodesk Mechanical Desktop 2008 Service Pack 2
Hotfix - Addresses two issues for Russian-only versions of Inventor R2008
Hotfix - Vista: Inventor unstable when EDM add-in is loaded
Hotfix - Unable to locate model geometry (Face) curves in cut view
Hotfix - Copy Design an assy with an Excel spreadsheet does not update the link
Hotfix - Drawings or sketches containing OLE objects may make Inventor unstable
Hotfix for scale correction for opened *.sat files in Inventor
ESKD Parts List does not get generated and Crashes after unloading 'ESKD Support' from Add-In Manager dialog
HOTFIX:Crash when updating the extents of workfeatures in an assembly document
Datum Target leaders move away from broken view when file is opened & Legacy drawings lose tables created in a previous version
Hotfix: Derived parts not updating
HOTFIX: After installing SP3 some mapped drives are not available in project
HOTFIX: Inventor crash on edit sketch/part rotate & display glitches
HOTFIX: Multiple Issues-String Resource Error, Drawing Prompts Save & Crash Open
HOTFIX: Renaming an iFeature corrupts table and member scope editing
HOTFIX: Editing iPart leads to inconsistent update in the iAssembly
HOTFIX:Refresh checks out files which will not be modified
Hotfix:Filename and path property prompting a save & Crash using Custom View to create drawing view
Autodesk Inventor 2008 Service Pack 2
Inventor Updated Templates -sheetmetal environments (French Only)
Hotfix - Custom library cannot be updated - Failure in update DIN EN 10278 family table
Hotfix - Redundant License Server
Autodesk Mechanical Desktop 2008 Service Pack 1
Hotfix - OptionKey issues on Autodesk Mechanical Desktop 2008
HOTFIX-Editing a Derived Assembly containing iParts will cause Inventor to crash
Autodesk Inventor 2008 Service Pack 1
Hotfix - End of Evaluation Period error during DWGIN
Hotfix - Styles Conflict Error after application of Autodesk® InventorT 2008 Service Pack (French only)
Hotfix - Styles Conflict Error after application of Autodesk® InventorT 2008 Service Pack (Spanish only)
Hotfix - SheetMetal localized template problem (Japanese only)
Hotfix - Mass Properties calculation issue on Autodesk Mechanical Desktop 2008
Hotfix - Resolving Fatal Errors with AcadmEx.arx Failing to Load and Other Issues (Autodesk Inventor Simulation Suite 2008)
Hotfix - Cannot Mirror Bend Capabilities from Sheet Metal Flange (German only)
Updating the Parker Content Center Library
Unable to create DWF file when checking in AutoCAD Mechanical DWG file (Polish only)
Hotfix - Drawing Templates (Polish only)
Hotfix - Autodesk Vault/Autodesk Productstream Online PDF (Polish only)
Hotfix - Autodesk Vault/Autodesk Productstream Online PDF (Korean only)
Hotfix - Part and Sheetmetal Templates (German only)
Back to top
Autodesk® Inventor™ Routed Systems Suite 2008
Hotfix - C++ project for Publishing DWF will reset the options in UI
Hotfix - Invalid reference to segment object used error when IDW is opened
Hotfix - Eccentric reducers give a slope in the pipe lines
Hotfix - Virtual Component iProperties are not updated properly
Inventor 2008 Service Pack 3 Client Update for Autodesk Data Management Server (ADMS) 2010
Hotfix - Hole edges turn to a B-spline when migrating the files from version 11
Hotfix - Fixes an issue where a derived part in an assembly becomes dirty after unsurpressing link
Hotfix - Fixes issue where the wrong thread feature color is displayed in Design Review
Hotfix - Drawing dimensions and title block text are lost when publishing to DWF
Hotfix - Part with exported parameters is prompted to Save when inserted into assembly
Hotfix - Cannot place instanced CC part for user "B" if part is checked out of the Vault by user "A"
Hotfix – Resolving issues with export of part list to Excel in AutoCAD Mechanical 2008 SP2 and Mechanical Desktop 2008 SP2
Hotfix - Thread class type is not shown correctly when the thread type is changed
Hotfix - Corrupt DXFOUT translation of hole note text and leader created in Break view
Hotfix - Angular dimensions w/tolerances created in a model are not promoted to the drawing correctly
Inventor 2008 Service Pack 3 Client Update for Autodesk Data Management Server (ADMS) 2009
Autodesk Inventor 2008 Service Pack 3
Inventor 2008 Service Pack 2 Client Upgrade for Autodesk Data Management Server (ADMS) 2009
Autodesk Mechanical Desktop 2008 Service Pack 2
Hotfix - Addresses two issues for Russian-only versions of Inventor R2008
Hotfix - Vista: Inventor unstable when EDM add-in is loaded
Hotfix - Unable to locate model geometry (Face) curves in cut view
Hotfix - Copy Design an assy with an Excel spreadsheet does not update the link
Hotfix - Drawings or sketches containing OLE objects may make Inventor unstable
Hotfix for scale correction for opened *.sat files in Inventor
ESKD Parts List does not get generated and Crashes after unloading 'ESKD Support' from Add-In Manager dialog
HOTFIX:Crash when updating the extents of workfeatures in an assembly document
Datum Target leaders move away from broken view when file is opened & Legacy drawings lose tables created in a previous version
Hotfix: Derived parts not updating
HOTFIX: After installing SP3 some mapped drives are not available in project
HOTFIX: Inventor crash on edit sketch/part rotate & display glitches
HOTFIX: Multiple Issues-String Resource Error, Drawing Prompts Save & Crash Open
HOTFIX: Renaming an iFeature corrupts table and member scope editing
HOTFIX: Editing iPart leads to inconsistent update in the iAssembly
HOTFIX:Refresh checks out files which will not be modified
Hotfix:Filename and path property prompting a save & Crash using Custom View to create drawing view
Autodesk Inventor 2008 Service Pack 2
Inventor Updated Templates -sheetmetal environments (French Only)
Hotfix - Custom library cannot be updated - Failure in update DIN EN 10278 family table
Hotfix - Redundant License Server
Autodesk Mechanical Desktop 2008 Service Pack 1
Hotfix - OptionKey issues on Autodesk Mechanical Desktop 2008
HOTFIX-Editing a Derived Assembly containing iParts will cause Inventor to crash
Autodesk Inventor 2008 Service Pack 1
Hotfix - End of Evaluation Period error during DWGIN
Hotfix - Styles Conflict Error after application of Autodesk® InventorT 2008 Service Pack (French only)
Hotfix - Styles Conflict Error after application of Autodesk® InventorT 2008 Service Pack (Spanish only)
Hotfix - SheetMetal localized template problem (Japanese only)
Hotfix - Mass Properties calculation issue on Autodesk Mechanical Desktop 2008
Hotfix - Resolving Fatal Errors with AcadmEx.arx Failing to Load and Other Issues (Autodesk Inventor Routed Systems Suite 2008)
Hotfix - Cannot Mirror Bend Capabilities from Sheet Metal Flange (German only)
Updating the Parker Content Center Library
Unable to create DWF file when checking in AutoCAD Mechanical DWG file (Polish only)
Hotfix - Drawing Templates (Polish only)
Hotfix - Autodesk Vault/Autodesk Productstream Online PDF (Polish only)
Hotfix - Autodesk Vault/Autodesk Productstream Online PDF (Korean only)
Hotfix - Part and Sheetmetal Templates (German only)
Back to top
Autodesk® Inventor™ Suite 2008
Hotfix - Some styles are not effective in Sheet Metal Styles of Inventor 2008
Hotfix - C++ project for Publishing DWF will reset the options in UI
Hotfix - Invalid reference to segment object used error when IDW is opened
Plot to PDF Not Centered With Custom Margins Hotfix
Hotfix - large file size after everything is deleted
Hotfix - Virtual Component iProperties are not updated properly
Inventor 2008 Service Pack 3 Client Update for Autodesk Data Management Server (ADMS) 2010
Hotfix - Hole edges turn to a B-spline when migrating the files from version 11
Hotfix - Fixes an issue where a derived part in an assembly becomes dirty after unsurpressing link
Hotfix - Fixes issue where the wrong thread feature color is displayed in Design Review
Non-Unicode Multiline Text Hotfix
Hotfix - Autodesk Activation Update
Open Failure from Windows Explorer Hotfix
Hotfix - Drawing dimensions and title block text are lost when publishing to DWF
WAN Acceleration 2008 Hotfix
Hotfix - Part with exported parameters is prompted to Save when inserted into assembly
Hotfix - Cannot place instanced CC part for user "B" if part is checked out of the Vault by user "A"
Hotfix – Resolving issues with export of part list to Excel in AutoCAD Mechanical 2008 SP2 and Mechanical Desktop 2008 SP2
Hotfix - Thread class type is not shown correctly when the thread type is changed
Hotfix - Corrupt DXFOUT translation of hole note text and leader created in Break view
Hotfix - Angular dimensions w/tolerances created in a model are not promoted to the drawing correctly
Inventor 2008 Service Pack 3 Client Update for Autodesk Data Management Server (ADMS) 2009
Autodesk Inventor 2008 Service Pack 3
Inventor 2008 Service Pack 2 Client Upgrade for Autodesk Data Management Server (ADMS) 2009
Autodesk Mechanical Desktop 2008 Service Pack 2
Hotfix - Addresses two issues for Russian-only versions of Inventor R2008
Hotfix - Vista: Inventor unstable when EDM add-in is loaded
Raster issues after installing Service Pack 1
Hotfix - Unable to locate model geometry (Face) curves in cut view
Hotfix - Copy Design an assy with an Excel spreadsheet does not update the link
Hotfix for scale correction for opened *.sat files in Inventor
ESKD Parts List does not get generated and Crashes after unloading 'ESKD Support' from Add-In Manager dialog
HOTFIX:Crash when updating the extents of workfeatures in an assembly document
Datum Target leaders move away from broken view when file is opened & Legacy drawings lose tables created in a previous version
Hotfix: Derived parts not updating
HOTFIX: After installing SP3 some mapped drives are not available in project
HOTFIX: Inventor crash on edit sketch/part rotate & display glitches
HOTFIX: Multiple Issues-String Resource Error, Drawing Prompts Save & Crash Open
HOTFIX: Renaming an iFeature corrupts table and member scope editing
HOTFIX: Editing iPart leads to inconsistent update in the iAssembly
HOTFIX:Refresh checks out files which will not be modified
Hotfix:Filename and path property prompting a save & Crash using Custom View to create drawing view
Hotfix - Vault Browser shows "?" on when large assemblies are opened.
Inventor Updated Templates -sheetmetal environments (French Only)
Hotfix - Custom library cannot be updated - Failure in update DIN EN 10278 family table
Hotfix - Linetype display
Hotfix - Redundant License Server
Hotfix – Secondary User Windows Start menu launch error
"Object not set to an instance of an Object" error using Plot Manager with IDWs.
Autodesk Mechanical Desktop 2008 Service Pack 1
Hotfix - OptionKey issues on Autodesk Mechanical Desktop 2008
HOTFIX-Editing a Derived Assembly containing iParts will cause Inventor to crash
Hotfix - End of Evaluation Period error during DWGIN
Hotfix - Styles Conflict Error after application of Autodesk® InventorT 2008 Service Pack (French only)
Hotfix - Styles Conflict Error after application of Autodesk® InventorT 2008 Service Pack (Spanish only)
Hotfix - SheetMetal localized template problem (Japanese only)
Hotfix - Mass Properties calculation issue on Autodesk Mechanical Desktop 2008
Hotfix - Resolving Fatal Errors with AcadmEx.arx Failing to Load and Other Issues (Autodesk Inventor Suite 2008)
Hotfix - DWF Package Not Viewable in Autodesk Design Review 2008
Task Scheduler DLL Registrations for Autodesk Vault and Productstream 5
Hotfix - Hungarian Layout Switching
Hotfix - Vista Group Policy Objects
Hotfix - Live Update
Unable to create DWF file when checking in AutoCAD Mechanical DWG file (Polish only)
Hotfix - Drawing Templates (Polish only)
Hotfix - Autodesk Vault/Autodesk Productstream Online PDF (Polish only)
Hotfix - Autodesk Vault/Autodesk Productstream Online PDF (Korean only)
Hotfix - Part and Sheetmetal Templates (German only)
Hotfix - Unable to Use or ADD DWG Files to ADMS 2008
Back to top
Autodesk Inventor® Series 11 DWF Extension
Hotfix - Table driven assembly does not update as expected
Hotfix - Incorrect hole note is shown
Hotfix - Unable to check in R11_SP4 files to ADMS 2009 server when project file is on a mapped drive
Hotfix - Editing R4 or R6 sheet metal parts in R11 occasionally fails
Hotfix - Failure occurs after moving a Release 11 dimension without a valid reference
Autodesk Inventor 11 Service Pack 4 Client Update for ADMS 2008
Autodesk Inventor 11 Service Pack 4 Client Update for ADMS 2009
Autodesk Inventor® 11 DWF Extension Service Pack 4
Inventor 11 Service Pack 3 Client Upgrade for Autodesk Data Management Server (ADMS) 2009
Productstream Professional 2009 Support for Inventor 11
Hotfix - Create or Edit Text in IDW Files After Applying Microsoft Hotfix KB918118.
HOTFIX: Copy Engineering Document references not replaced in IDW's containing iPart factories
HOTFIX: Japanese version does not translate parts list properties to Part Reference attributes in DWG
Autodesk Inventor® 11 DWF Extension Service Pack 3
Inventor 11 Service Pack 3 Client Upgrade for Autodesk Data Management Server (ADMS) 2008
Hotfix - Drawing and/or Partslist Substitution Does Not Update
Hotfix - Inventor 10 Presentation Files do not Migrate Correctly to Inventor 11
Hotfix - A Shared Project Allows Checked Out Files to be Modified and Saved by Another User & Drawing Crashes Involving Sick Assemblies
Hotfix - Assembly Revolve Creates Bad Cross Database References
Hotfix - Unable to Use the Delete Face Command for Internal Empty Lumps
Hotfix - Cannot Change the Size of Migrated Content Parts
Hotfix - Can't Place a Customer Library Part from Content Center
Hotfix - Save as JT Units are Always in Centimeter
Hotfix - Print DWG Problem: No Option to Turn Off the Parts List and Table
Hotfix - Open Base Component Command Dirties Derived Parts
Hotfix - File Migration Results in Crash of Inventor
Hotfix - Drawing Does Not Update when Changes are Made to the Referenced Files
Hotfix - Performance and Stability Problems During DWF Publishing under DWF Extension
Hotfix - Memory Consumed Rapidly when Exiting a Populated Pipe Run
Hotfix - Instability When Exporting IDW's to DWF
Hotfix - Design Assistant Doesn't Identify What Files Need to be Resolved and a Database ID Error Occurs During a Rename
Autodesk Inventor 11 DWF Extension Service Pack 2
Back to top
Autodesk Inventor® Series 11
Hotfix - Table driven assembly does not update as expected
Hotfix - Incorrect hole note is shown
Hotfix - Autodesk Activation Update
WAN Acceleration 2007 Hotfix
Hotfix - Unable to check in R11_SP4 files to ADMS 2009 server when project file is on a mapped drive
Hotfix - Editing R4 or R6 sheet metal parts in R11 occasionally fails
Hotfix - Inventor Release 11 mass property values do not get saved into iProperties
Hotfix - Inventor Release 11 IPN file saved as DWF results in error during DWF creation
Hotfix - Failure occurs after moving a Release 11 dimension without a valid reference
Autodesk Inventor 11 Service Pack 4 Client Update for ADMS 2008
Autodesk Inventor® 11 Service Pack 4
Fatal Error Plotting to CAL Format Hotfix
Autodesk Inventor 11 Service Pack 4 Client Update for ADMS 2009
Inventor 11 Service Pack 3 Client Upgrade for Autodesk Data Management Server (ADMS) 2009
Hotfix - OptionKey issues on Autodesk Mechanical Desktop 2007 - Japanese, Traditional Chinese, Simplified Chinese and Korean
Productstream Professional 2009 Support for Inventor 11
Hotfix - Inventor Vault Browser Refresh & LOD
Hotfix - Create or Edit Text in IDW Files After Applying Microsoft Hotfix KB918118.
HOTFIX: After installing SP3 some mapped drives are not available in project
Hotfix: Opening file generates a warning "String resource could not be loaded"
Hotfix: Drawing/Assembly Updates do not trigger a save request in drawing files & Screen diagonally divides in the drawing environment
Inventor loses the connection to the lockfile.lck
HOTFIX-Assembly features grow IAM file size dramatically
HOTFIX: Copy Engineering Document references not replaced in IDW's containing iPart factories
HOTFIX: Japanese version does not translate parts list properties to Part Reference attributes in DWG
Hotfix - Image Manipulations Improvement
Hotfix - Mass Properties calculation issue on Autodesk Mechanical Desktop 2007
Inventor 11 Service Pack 3 Client Upgrade for Autodesk Data Management Server (ADMS) 2008
Autodesk Inventor® 11 Service Pack 3
Task Scheduler DLL Registrations for Autodesk Vault and Productstream 5
Hotfix - Layout Switching (Hungarian only)
Hotfix - Improve performance for Content Center Libraries in Autodesk Data Management Server 5
Autodesk Mechanical Desktop 2007 Service Pack 2 (Autodesk Inventor Series 11)
Hotfix - Unable to Use or ADD DWG Files to ADMS 2008
Hotfix - Drawing and/or Partslist Substitution Does Not Update
Hotfix - Inventor 10 Presentation Files do not Migrate Correctly to Inventor 11
Hotfix - Allowing Copy Design, Rename and Edit Properties Without File Migration
Hotfix - A Shared Project Allows Checked Out Files to be Modified and Saved by Another User & Drawing Crashes Involving Sick Assemblies
Hotfix - Assembly Revolve Creates Bad Cross Database References
Hotfix 2 for AutoCAD Mechanical 2007 and Mechanical Desktop 2007
Hotfix - Unable to Use the Delete Face Command for Internal Empty Lumps
Hotfix - Cannot Change the Size of Migrated Content Parts
Hotfix - Can't Place a Customer Library Part from Content Center
Hotfix - Deployment Error with Internet Explorer
Hotfix - Open Base Component Command Dirties Derived Parts
Hotfix - File Migration Results in Crash of Inventor
Hotfix - OLE Error
Hotfix - Drawing Does Not Update when Changes are Made to the Referenced Files
Hotfix - Memory Consumed Rapidly when Exiting a Populated Pipe Run
Hotfix - Instability when dragging components
Hotfix - Closing Drawings
Hotfix - Updates to Online Help (Czech Only)
Hotfix - Crash When Using Find and Replace (Polish Only)
Hotfix - Plotting to Raster Files Performance Improvement
Hotfix - Regenerating Drawings Containing Text
Autodesk Mechanical Desktop 2007 Service Pack 1 (Autodesk Inventor Series 11)
Autodesk Inventor 11 Service Pack 2
Hotfix - Design Assistant Doesn't Identify What Files Need to be Resolved and a Database ID Error Occurs During a Rename
Hotfix - DesignData (Spanish only)
Hotfix - DWF Publish Inconsistency with Inventor and EDIT Command
Hotfix - Content Center Filter Performance Improvement
Hotfix - Inventor Crashes When Placing Data from Content Center Via AutoDrop or on Copy Design View to Level of Detail
Hotfix - Rotational Tweaks Disappear on Replay in DWF Viewer
Hotfix - Read/Write Libraries Will Not Migrate When Upgrading to ADMS 5
Hotfix - Cut and Paste
Hotfix - Cannot Place Origin Indicator on Virtual Sharp on Hole Table (Selection Type)
Hotfix - Balloons Attached to Migrated Assembly Views Lose Associativity When Detached and Reattached to Another Component
Hotfix - Unable to Sort Parts List by Part Number Column
Hotfix - Inventor Presentation Files (IPN) Fail to Open or Migrate in Inventor 11
Hotfix - Local Setting "comma as decimal separator" Breaks Ability to Parse Bend Table with Periods
Hotfix - Some Content Center Components are Not Updated After Refreshing Standard Components
Hotfix - Cannot Specify Origin Point for Ordinate Dimension Sets and Cannot Create a Bisector Centerline on Concentric Arcs
Hotfix - Inventor Becomes Unstable when Copying Design View to Level of Detail
Hotfix - Instability When Attempting to Place a New Subassembly into an Existing Assembly
Autodesk Inventor 11 Service Pack 1
Hotfix - Translation Issues in Thread.xls (Polish Only)
Hotfix - Fatal Error During Save
Hotfix - Inventor 11 DWF Extension Needed for Autodesk Design Review 2007 & DWF Viewer 7
Hotfix - DIN hole naming convention (German only)
Hotfix - Sheet metal cut pattern (Italian only)
Hotfix - Performance problems with Autoloader and Design Assistant
SAMreport-Lite Update
Hotfix - Memory leaks when using the Design Assistant
Hotfix - Mapped Folders for Content Center files lost after restart
Back to top
Autodesk Inventor® Series 9
Hotfix - Create or Edit Text in IDW Files After Applying Microsoft Hotfix KB918118.
Back to top
Autodesk® Inventor® 2012
Hotfix - iLogic BOM override is inconsistent
Hotfix - ScreenUpdating property changes to True when another window gets the focus & stabilty issues (see Summary)
Hotfix - Multiple Issues Addressed (see Summary and readme file)
Hotfix - Task Scheduler Check-In corrupts BOM/Error 1200 on Item Assign & Cannot use the iLogic Add Rule
Hotfix - Projected edge will not select as a closed loop for offset
Localization Hotfix - Unit translation (German)
Localization Hotfix - Simulation Guide (French, Italian, German, Spanish)
Localization Hotfix - Unit translation (Italian)
Localization Hotfix - API Help (German, French, Italian)
Hotfix - Drive constraint is unable to be recorded into avi file
Autodesk Inventor 2012 Service Pack 1
Localization Hotfix - Technical Requirement (Russian)
Content Center Hotfix
Hotfix - Unexpected exit when update of drawing views occurs
Hotfix - iLogic assemblies dependent on derived or linked parameters exhibit poor performance on update & Unexpected exit on close of drawing after use of iLogic form with parameters
Hotfix - Unexpected exit when cancel Miter dialog box (French Version Only)
Hotfix - Hole feature termination type defaults to Through ALL **Review readme file prior to installation of this Hotfix**
Hotfix - Length updates are not updating correct parameters
Hotfix - Options not functioning properly for Export Face As
Localization Hotfix for “License Agreement” button is grayed (Czech, French, Italian, Russian and Spanish)
Autodesk IPv4 Network License Manager for Windows
Autodesk IPv6 Network License Manager for Windows
Back to top
Autodesk® Inventor® 2011
Hotfix - LOD displays incorrectly in graphic window
Hotfix - iLogic BOM override is inconsistent
Hotfix - Corrupted files created when generating new DWF in a batch linked
UPDATED 6/30/2011 - Autodesk Inventor 2011 Subscription Advantage Pack Service Pack 2 Client Update for Autodesk Vault 2012 Server Releases
UPDATED 6/30/2011 - Autodesk Inventor 2011 Service Pack 2 Client Update for Autodesk Vault 2012 Server Releases
Autodesk Inventor 2011 Service Pack 2
Autodesk IPv4 Network License Manager for Windows
SAMReport-lite for Windows 7
Autodesk InfoCenter Hot Fix
Autodesk Materials Library 2011 Update 1
Autodesk IPv6 Network License Manager for Windows
Back to top
Autodesk® Inventor® 2010
UPDATED 10/27/2011 - Autodesk Inventor 2010 Service Pack 4 Client Update for Autodesk Vault 2011 Update 2 (SP2) Server Releases
Autodesk Inventor 2010 Subscription Advantage Pack Service Pack 4 Client Update for Autodesk Vault 2011 Update 2 (SP2) Server Releases
Autodesk Inventor 2010 Subscription Advantage Pack Service Pack 4 Client Update for Autodesk Vault 2012 Server Releases
Autodesk Inventor 2010 Service Pack 4 Client Update for Autodesk Vault 2012 Server Releases
Autodesk Inventor 2010 Service Pack 4 Client Update for Autodesk Vault 2011 Update 2 (SP2) Server Releases
Autodesk Inventor 2010 Service Pack 4
Autodesk IPv4 Network License Manager for Windows
Hotfix - Lost functionality of attaching symbols to Ordinate Dimension Set
Autodesk Inventor 2010 Subscription Advantage Pack Service Pack 3 Client Update for Autodesk Vault 2011 Update 1 (SP1) Server Releases
Autodesk Inventor 2010 Service Pack 3 Client Update for Autodesk Vault 2011 Update 1 (SP1) Server Releases
Autodesk Inventor 2010 Service Pack 3
Hotfix - Performance issue when publishing DWF files from an assembly with Shrinkwrap LOD
Autodesk IPv6 Network License Manager for Windows
Autodesk Inventor 2010 Service Pack 2
Back to top
Autodesk® Inventor™ 2009
Hotfix - Property Editing and Inventor file dependencies
Back to top
Autodesk® Inventor™ 2008
WAN Acceleration 2008 Hotfix
Hotfix - Assemblies open and prompt to resolve files Copy Design and Excel
Hotfix: Custom Properties do not get extracted for Inventor DWG files
Hotfix - Drawings or sketches containing OLE objects may make Inventor unstable
R2008 Support for ADR R2009
R2008 Support for ADR R2009 in Side-By-Side Installation
Hotfix - DWF generation causes Inventor crash in Productstream Pro
Autodesk Inventor 2008 Service Pack 2
Autodesk Data Management Server 2008 Service Pack 1
Autodesk Inventor 2008 Service Pack 1
Hotfix - End of Evaluation Period error during DWGIN
Updating the Parker Content Center Library
Hotfix - R6025 Errors from Inventor Integration with Productstream Professional 2008
Hotfix - Inventor DWG Files Opened in AutoCAD 2008 may not Display Annotations
Back to top
Autodesk Inventor® 11
HOTFIX: DWF publishing embeds incorrect font
Hotfix - Incorrect structure synchronization from Inventor to Compass
Autodesk Data Management Server 2008 Service Pack 1
Hotfix - R6025 Errors from Inventor Integration with Productstream Professional 2008
Hotfix - R6025 Errors from Inventor Integration with Compass 5
Back to top
Autodesk® Inventor® Professional 2012
Hotfix - iLogic BOM override is inconsistent
Hotfix - ScreenUpdating property changes to True when another window gets the focus & stabilty issues (see Summary)
Hotfix - Multiple Issues Addressed (see Summary and readme file)
Hotfix - Task Scheduler Check-In corrupts BOM/Error 1200 on Item Assign & Cannot use the iLogic Add Rule
Hotfix - Projected edge will not select as a closed loop for offset
Localization Hotfix - Unit translation (German)
Localization Hotfix - Simulation Guide (French, Italian, German, Spanish)
Localization Hotfix - Unit translation (Italian)
Localization Hotfix - API Help (German, French, Italian)
Hotfix - Drive constraint is unable to be recorded into avi file
Autodesk Inventor 2012 Service Pack 1
Localization Hotfix - Technical Requirement (Russian)
Content Center Hotfix
Localization Hotfix - Inventor Professional 2012
Hotfix - Unexpected exit when update of drawing views occurs
Hotfix - iLogic assemblies dependent on derived or linked parameters exhibit poor performance on update & Unexpected exit on close of drawing after use of iLogic form with parameters
Hotfix - Unexpected exit when cancel Miter dialog box (French Version Only)
Hotfix - Hole feature termination type defaults to Through ALL **Review readme file prior to installation of this Hotfix**
Hotfix - Length updates are not updating correct parameters
Hotfix - Options not functioning properly for Export Face As
Localization Hotfix for “License Agreement” button is grayed (Czech, French, Italian, Russian and Spanish)
Mold Design Desktop Content Libraries for Autodesk Inventor Professional 2012
Hotfix - Unexpected exit when using the assemble command while using a 3D connexion space mouse
Hotfix - iLogic Design Copy does not work in 64 bit machine
Hotfix - Runner Balance in Autodesk Inventor Professional 2012 Mold Design does not work with Autodesk Moldflow Advisor 2011 or 2012
Autodesk IPv4 Network License Manager for Windows
Autodesk IPv6 Network License Manager for Windows
Back to top
AutoCAD® Inventor® Professional Suite 2011
Hotfix - LOD displays incorrectly in graphic window
Hotfix - iLogic BOM override is inconsistent
Hotfix - Projected edge will not select as a closed loop for offset
Hotfix - OnFileDirty fires for sub-assembly when update top assembly, however the sub-assembly is not dirty
Localization Hotfix - Unit translation (German)
Hotfix - Update properties returns incorrect data to the virtual components & Vault Auto-Silent Login does not work for Inventor 2011 after installation of Service Pack 2
Hotfix - Corner error when creating flat pattern
Hotfix - Corrupted files created when generating new DWF in a batch linked
Hotfix - OnPopulateFileMetadata for instances from same file not functioning properly
Hotfix - Unexpected exit when editing 3D sketch & Unexpected exit on close of error dialog from applying bend command
Hotfix - Merged eccentric frame generator beams report wrong beam length
UPDATED 6/30/2011 - Autodesk Inventor 2011 Subscription Advantage Pack Service Pack 2 Client Update for Autodesk Vault 2012 Server Releases
UPDATED 6/30/2011 - Autodesk Inventor 2011 Service Pack 2 Client Update for Autodesk Vault 2012 Server Releases
Hotfix - iCopy uses the wrong components to construct the assembly patterns
Hotfix - Hit entity fails when fill bend relief and causes corner to fail
Hotfix - OnPopulateFileMetadata event is needed to set FileMetaData File Location when using the Copy Components command & an unexpected exit when handling event OnFileInsertNewDialog with Shrinkwrap command
Hotfix - FileManager.GetLastActiveDesignViewRepresentation throw COMException if active view is Master
AutoCAD Mechanical 2011 Update 2
Autodesk Inventor 2011 Service Pack 2
Hotfix - iPart with linked parameter file triggers redundant prompt for Save
Hotfix - iPart with exported parameters trigger redundant prompt for Save
Autodesk IPv4 Network License Manager for Windows
Hotfix - FileMetadata.FullFileName within OnPopulateFileMetadata event does not function as expected for Make Part / Make Component
Hotfix - Unable to attach dimension to center mark
Hotfix - Apprentice API “FileManager. GetLevelOfDetailRepresentations” return different results when document is opened/closed
Hotfix - Loss of all assembly constraints when iPart is modified
Hotfix - Mass is doubled when you create a Substitute LOD
Hotfix - Tube & Pipe content can't be inserted with AIS network license
Hotfix - SurfaceEvaluator.GetParamAtPoint could not accept uninitialized GuessParams for .Net code
Hotfix - Wrong BOM quantity when QTY has units and is set to "Static Quantity"
Hotfix - Unexpected exit while hovering cursor over inserted image in drawing while using "Home" key to zoom
Hotfix - PartDocument.FileSaveCounter will be increased by one when saving a non-dirtied document.
Hotfix - Unable to balloon components promoted from table replaced iAssembly with phantom BOM structure
Hotfix - Task Scheduler ignores checked out files
Hotfix - Assembly constraints fail on folded parts
Hotfix - Unable to create work axis with point and surface
German hotfix - Correct translation issue for 2 commands in AutoCAD ® Inventor ® 2011 Ribbon interface
Hotfix - Performance and stability issue when deriving large assembly
Hotfix - Update properties returns incorrect data to the virtual components & Vault Auto-Silent Login does not work for Inventor 2011
AutoCAD Mechanical 2011 Update 1
Hotfix - Joints manually created in the DS environment may get lost after saving the document more than once in Simulation mode
Hotfix - Drawing annotations missing after migration to Inventor 2011
Autodesk Inventor 2011 Service Pack 1
Hotfix - iMates do not update with members after publishing iPart to Content Center
Hotfix - System instability may occur during Moldflow analysis
Hotfix - Multiple enhancements for Alias Design for Inventor (see readme)
Hotfix - Unexpected exit when rendering in Studio
Updated Certified Hardware Library
Hotfix - Bitmap in drawing is distorted in preview and not printed
Hotfix- Improving the surface patching in Alias Design Inventor add-in
Layout Viewport and Property Palette Hotfix for AutoCAD® Mechanical 2011
Hotfix: Vault dialogues appear in English on AutoCAD Inventor 2011 (Italian, Spanish, Czech and Russian languages only)
Hotfix - Moldflow add-in license needs to be updated after OS is upgraded or network card is changed
Hotfix - Multiple localization and performance issues with the Vault Add-In (To be installed in conjunction with Autodesk Vault 2011 Update 1)
Hotfix - Stress analysis application can not be identified in Inventor 2011 64 bit (French version ONLY)
Hotfix-AutoCAD Inventor 2011 Japanese Doc files
Hotfix - Inventor 2011 unexpectedly exits on feature creation
Hotfix - Change parameter value from linked Excel file does not update sketch
Hotfix - Wrong size imported for V4 model with non-mm units
Hotfix - Parameter value assigned by an iLogic rule with non-cm or non-database units may be off by a large factor. (Russian Version Only)
Hotfix - Occasional performance degradation seen with Inventor 2011 on Windows 7
Autodesk IPv6 Network License Manager for Windows
Back to top
AutoCAD® Inventor® Professional Suite 2010
Hotfix - Unexpected exit when inserting surface annotation
Hotfix - OnFileDirty fires for sub-assembly when update top assembly, however the sub-assembly is not dirty
Hotfix - Failure of occurence.name setting value after occurence.replace
Hotfix - Manipulating 3D sketch causes file size to increase
UPDATED 10/27/2011 - Autodesk Inventor 2010 Service Pack 4 Client Update for Autodesk Vault 2011 Update 2 (SP2) Server Releases
Hotfix - Degree Of Freedom displays incorrectly for grounded part, Design Views not honored & stability enhancements
Hotfix - Custom thread designation for assembly feature lost after derived & stablity enhancement
Autodesk Inventor 2010 Subscription Advantage Pack Service Pack 4 Client Update for Autodesk Vault 2011 Update 2 (SP2) Server Releases
Autodesk Inventor 2010 Subscription Advantage Pack Service Pack 4 Client Update for Autodesk Vault 2012 Server Releases
Autodesk Inventor 2010 Service Pack 4 Client Update for Autodesk Vault 2012 Server Releases
Autodesk Inventor 2010 Service Pack 4 Client Update for Autodesk Vault 2011 Update 2 (SP2) Server Releases
Autodesk Inventor 2010 Service Pack 4
Hotfix - iFeatures fail after Rebuild All
Hotfix - Dimensions are disconnected from geometry when drawing opened
Hotfix - Unexpected exit after using Split command followed by other operations on part body
Hotfix - Unexpected exit when iFeature Catalog folder contains more than 2000 files
Hotfix - Linked files are not located in Content Center libraries automatically
Hotfix - Unexpected exit when Taper thread hole made with Inventor 11 is edited with Inventor 2010
Hotfix - Inventor 2010 unexpectedly exits when opening migrated Inventor R11 IDW's
Autodesk IPv4 Network License Manager for Windows
Hotfix - Export to PDF creates unreadable font characters
Hotfix - iFeature errors with some features on recompute
Hotfix - Unable to place fitting in route section
Hotfix - Refresh From Vault overwrites locally saved files (For use with Autodesk Vault 2011)
Hotfix - Content Center ownership transfers replicated in Autodesk Vault Collaboration 2011 are not seen
Hotfix - FileAccessEvents.OnFileResolution::RelativeFileName returns incorrect results
Hotfix - PartDocument.FileSaveCounter will be increased by one when saving a non-dirtied document
Hotfix - Character “$” is invalid in Content Center file name or folder name
Hotfix - Refresh From Vault overwrites locally saved files
Hotfix - Inventor file Save by "Save Copy As", Stress Analysis file name does not update.
Hotfix - Thread properties do not map properly when published to Content Center
Hotfix - iFeature insert dialog will show "Create Package" instead of description of iFeature
Hotfix - Unexpected exit when rendering on multicore machine
Hotfix - Multiple issues addressed, see description and readme file for details
Hotfix - The property "ReferencedDocumentDescriptors" of substitute cannot be read
Hotfix - Unexpected exit when saving a drawing where references have been replaced
Hotfix - Unexpected exit when inserting a "Feature control frame" (see readme) & Updating a drawing document with replaced references may cause instability in invisible mode
Hotfix - Slow performance when moving imported logo in a 2D sketch
Hotfix - Unexpected exit when the profile is changed to a different standard or profile type
Hotfix - Mapping a custom property to a Content Center template parameter may cause existing parameter mapping to be lost
Hotfix - Two Bend Notes for same bend line - one shows "Up" the other shows "Down"
Hotfix - Reflections in drawings cannot be disabled
Hotfix - VBA editor needs to be invoked upfront to improve VBA macro performance
Hotfix - Detail View of Aligned Section View loses data
Hotfix - Content Center appears empty until log out / login
Hotfix - Unexpected exit when the Chamfer/Fillet feature recomputes with an unstable edge
Hot fix -Certain parts with Fold features can’t be converted to Sheet Metal on AutoCAD Inventor 2010 Spanish and Italian
Hotfix - Constraint failures after suppressing occurrences or activating subassembly substitute
AutoCAD Mechanical 2010 Update 2
Hotfix - Lost functionality of attaching symbols to Ordinate Dimension Set
Autodesk Inventor 2010 Subscription Advantage Pack Service Pack 3 Client Update for Autodesk Vault 2011 Update 1 (SP1) Server Releases
Autodesk Inventor 2010 Service Pack 3 Client Update for Autodesk Vault 2011 Update 1 (SP1) Server Releases
Hotfix - FEA mesh warning label(s) remain even if the mesh is successfully generated in subsequent meshing trials
Autodesk Inventor 2010 Service Pack 3
Hotfix - Exporting Inventor DWG file to Native AutoCAD Format explodes hatching
Hotfix - Performance issue when publishing DWF files from an assembly with Shrinkwrap LOD
Autodesk IPv6 Network License Manager for Windows
Hotfix - Inventor unexpectedly exits when switching LOD
Hotfix - Create some GOST symbols will cause the action "Zoom All" in Russian Inventor 2010
Hotfix - User needs the ability to set a different unit as "cm" for sheet metal properties
Hotfix - Flat pattern user parameters won't update into custom properties
Autodesk Inventor 2010 Service Pack 2
Hotfix - Inventor 2010 Vault Add-In functionality for locked files is affected by ADMS2010 Update 1 installation
Hotfix - Service Pack 1 license borrowing and Communication Center Service Pack 1 recognition
Hotfix - Locked file Icon not visibile(please reference Autodesk Vault 2010 Update 1), Option buttons are grayed out when exporting as other format & slow browsing performance in OpenFromVault
hotfix to address Ribbon UI translation quality issue in AutoCAD Inventor 2010 for Polish
Hotfix - Inventor 2010 SP1 unexpectedly exits when saving dwg with a "Iso Top Left" view
Hotfix - Assembly features in iAssembly factory become suppressed after migration
Hotfix - Performance improvments for stress analysis operations
Hotfix - Refresh Standard Components command reverts instances defined length to default length
Update to documentation included in Inventor 2010 regarding Network License Support.
Autodesk Inventor 2010 Service Pack 1
AutoCAD Mechanical 2010 Update 1
Hotfix - Importing dxf shapes containing splines in Inventor results in bad shapes
Hotfix - Ribbon language will use operating system installed language instead of product language
Hotfix - Added feature creates a phantom web
Hotfix - BindKeyToInterface failed using Apprentice API
Hotfix - Inventor hangs on creating any ESKD symbol on a pattern of rectangles
FLEXnet Licensing Hotfix for 64-bit Windows
Register Today Proxy Licensing Hotfix
Hotfix - Mass properties not accurate when base feature is modified
Hotfix - When exporting to STL file data is not displayed correctly
Hotfix - Unprintable characters appear in the menus and tooltips
Hotfix - Dimension tolerances change unexpectedly when method is changed
Localization AutoCAD Mechanical Hotfix for Italian and Chinese Simplified
Localization Hotfix - localized AutoCAD commands are not recognized in the first attempt
Autodesk Inventor Show Me Update
Hotfix: Link in AutoCAD Inventor 2010 tutorial doesn't work(CHS only)
Hotfix - Exported ADSK files cause unexpected exit of Revit
Hotfix - Non-English Local fonts are not working when exporting to PDF
Autodesk Inventor Simulation Help Update
Back to top
Autodesk® Inventor® Professional for Simulation 2009
Hotfix - Resolving GOST Issues (Russian only)
Hotfix - Resolving the "Surface Texture" under "_amsurfsym" command issue (Simplified Chinese only)
Hotfix - OptionKey issues on Autodesk Mechanical Desktop 2009 - Japanese, Traditional Chinese, Simplified Chinese and Korean
Back to top
Autodesk® Inventor® Professional for Routed Systems 2009
Hotfix - Resolving GOST Issues (Russian only)
Hotfix - Resolving the "Surface Texture" under "_amsurfsym" command issue (Simplified Chinese only)
Hotfix - OptionKey issues on Autodesk Mechanical Desktop 2009 - Japanese, Traditional Chinese, Simplified Chinese and Korean
Back to top
Autodesk® Inventor™ Professional 2009
Hotfix - Error in drawing Section view after model update
Hotfix - Performance deteriorates on insert of drawing annotation
Hotfix - 32-bit host error message on file open
Hotfix - Idrop does not work correctly when use CC part on mirrored feature or in ipart
Hotfix - Custom frame iProperties are not updated after change command
Hotfix - Exporting a monochromatic DWF is not available
Hotfix - Rebuild All will fail with Extrusion
Hotfix - The setting of "Defer Updates" of idw file becomes invalid when "Open From Vault"
Hotfix - When migrating an Inventor 11 library some families get faulty names
Hotfix - Deleting one segment of a 3D-sketch will corrupt workfeature (axis)
Hotfix - After migrating drawings the # of holes will not be displayed correctly
Hotfix - When opening placed iPart members an Error "Save method of Workbook class failed"
Hotfix - Inventor unexpectedly exits while publishing DWF with model containing weld
Hotfix - Inventor unexpectedly exits when saving a file
Hotfix - Dimension tolerances change unexpectedly when method is changed
Hotfix - Importing dxf shapes containing splines in Inventor results in bad shapes
Service Pack 3 Hotfix
Autodesk Mechanical Desktop 2009 Service Pack 3
AutoCAD Mechanical 2009 Service Pack 3
Autodesk Inventor 2009 Service Pack 2
Inventor 2009 Service Pack 2 Client Update for Autodesk Data Management Server (ADMS) 2010
Hotfix - Contains multiple fixes for various issues (see readme files for details)
Inventor 2009 Subscription Bonus Pack Client Update for Autodesk Data Management Server (ADMS) 2010
Inventor 2009 Service Pack 1 Client Update for Autodesk Data Management Server (ADMS) 2010
Hotfix - Fixes an issue where the UI does not update or truncates toolbar icons and menu items
Hotfix - Fixes an issue where Inventor unexpectedly exits while importing Mechanical Desktop files
Hotfix - Fixes issue where custom library is missing data after migration from ADMS 2008 to 2009
Hotfix - Fixes an issue where a model error occurs on view after upgrade from Inventor 2008 to 2009
Hotfix - Autodesk Activation Update
Hotfix - Fixes an issue where changing the assy LOD does not change the embedded sub-assy LOD
Hotfix - Runtime error & crash in Content Center after switching restricted user accounts
Hotfix-content center files cannot be opened after copy design (PLK)
Hotfix-content center files cannot be opened after copy design (RUS)
Hotfix-content center files cannot be opened after copy design (CSY)
Hotfix-content center files cannot be opened after copy design (DEU)
Hotfix - Fixes the issue where Inventor occasionally fails to exit cleanly after having used Vault
Hotfix - Redundant License Server
Hotfix - Fixes an issue where Inventor prematurely exits on close (CER)
Hotfix-content center files cannot be opened after copy design (ESP)
Hotfix-content center files cannot be opened after copy design (FRA)
Hotfix - Fixes the issue where iParts driven by parameters do not place correctly
Hotfix - Fixes the issue of the lowest pitch size selected by default for metric tapped holes
AutoCAD Mechanical 2009 Service Pack 2
Autodesk Mechanical Desktop 2009 Service Pack 2
Hotfix - Unit translation issue in Autodesk Inventor 2009 for Korean
Hotfix - Fixes the issue where hole edges turn to B-splines when migrating R11 drawings to R2009.
Hotfix: "Inventor Not Responding in Design Accelerator" in Autodesk® Inventor™ 2009 German 64 bit
Autodesk Inventor 2009 Service Pack 1
WAN Acceleration 2009 Hotfix
Hotfix - Resolving GOST Issues (Russian only)
Open Close Save Hotfix
Hotfix-content center files cannot be opened after copy design (ITA)
AutoCAD Mechanical 2009 Service Pack 1
Autodesk Mechanical Desktop 2009 Service Pack 1
Hotfix - Harness Data importing issue in Autodesk Inventor 2009 (French)
Hotfix - Resolving the "Surface Texture" under "_amsurfsym" command issue (Polish only)
Hotfix - Resolving the "Surface Texture" under "_amsurfsym" command issue (Simplified Chinese only)
Hotfix - Resolve missing up and down arrow buttons in Content Center Editor (Korean only)
Hotfix - Check In progress bar does not get closed when checking in a drawing with DWF Publish
Hotfix - Content Center configuration dialog may fail to invoke after R11 migration
Hotfix - Difficulties migrating older Presentation (.ipn) files to Inventor R2009
Hotfix - Inventor DWG files have problems after check-in using an Inventor shared project
German Hotfix - Inventor 2009 Hotfix for Representation Views error
Traditional Chinese Hotfix - Content Center Library update issue in Inventor 2009 for Inventor 11 Service Pack Client Upgrade for ADMS 2009
Render Hotfix
Hotfix - Sheet Metal Mirror/Pattern issues in Chinese version only of Inventor 2009
Hotfix - Object Property Settings drawing proportion issue on ACM and MDT 2009 - Japenese
Hotfix - OptionKey issues on Autodesk Mechanical Desktop 2009 - Japanese, Traditional Chinese, Simplified Chinese and Korean
Hotfix - Localization update for Chinese GB Families in Content
Hotfix - Fixes the API issue of OnNewView event not being raised sporadically
Hotfix - Unable to locate model geometry (Face) curves in cut view
Back to top
Autodesk® Inventor™ Professional 2008
Hotfix - Some styles are not effective in Sheet Metal Styles of Inventor 2008
Hotfix - C++ project for Publishing DWF will reset the options in UI
Hotfix - Invalid reference to segment object used error when IDW is opened
Hotfix - Eccentric reducers give a slope in the pipe lines
Plot to PDF Not Centered With Custom Margins Hotfix
Hotfix - large file size after everything is deleted
Hotfix - Virtual Component iProperties are not updated properly
Inventor 2008 Service Pack 3 Client Update for Autodesk Data Management Server (ADMS) 2010
Hotfix - Hole edges turn to a B-spline when migrating the files from version 11
Hotfix - Fixes an issue where a derived part in an assembly becomes dirty after unsurpressing link
Hotfix - Fixes issue where the wrong thread feature color is displayed in Design Review
Non-Unicode Multiline Text Hotfix
Hotfix - Autodesk Activation Update
Open Failure from Windows Explorer Hotfix
Hotfix - Drawing dimensions and title block text are lost when publishing to DWF
Hotfix - Part with exported parameters is prompted to Save when inserted into assembly
Hotfix - Cannot place instanced CC part for user "B" if part is checked out of the Vault by user "A"
Hotfix – Resolving issues with export of part list to Excel in AutoCAD Mechanical 2008 SP2 and Mechanical Desktop 2008 SP2
Hotfix - Thread class type is not shown correctly when the thread type is changed
Hotfix - Corrupt DXFOUT translation of hole note text and leader created in Break view
Hotfix - Angular dimensions w/tolerances created in a model are not promoted to the drawing correctly
Inventor 2008 Service Pack 3 Client Update for Autodesk Data Management Server (ADMS) 2009
Autodesk Inventor 2008 Service Pack 3
Inventor 2008 Service Pack 2 Client Upgrade for Autodesk Data Management Server (ADMS) 2009
Autodesk Mechanical Desktop 2008 Service Pack 2
Hotfix - Addresses two issues for Russian-only versions of Inventor R2008
Hotfix - Vista: Inventor unstable when EDM add-in is loaded
Raster issues after installing Service Pack 1
Hotfix - Unable to locate model geometry (Face) curves in cut view
Hotfix - Copy Design an assy with an Excel spreadsheet does not update the link
Hotfix - Drawings or sketches containing OLE objects may make Inventor unstable
Hotfix for scale correction for opened *.sat files in Inventor
ESKD Parts List does not get generated and Crashes after unloading 'ESKD Support' from Add-In Manager dialog
HOTFIX:Crash when updating the extents of workfeatures in an assembly document
Datum Target leaders move away from broken view when file is opened & Legacy drawings lose tables created in a previous version
Hotfix: Derived parts not updating
HOTFIX: After installing SP3 some mapped drives are not available in project
HOTFIX: Inventor crash on edit sketch/part rotate & display glitches
HOTFIX: Multiple Issues-String Resource Error, Drawing Prompts Save & Crash Open
HOTFIX: Renaming an iFeature corrupts table and member scope editing
HOTFIX: Editing iPart leads to inconsistent update in the iAssembly
HOTFIX:Refresh checks out files which will not be modified
Hotfix:Filename and path property prompting a save & Crash using Custom View to create drawing view
Autodesk Inventor 2008 Service Pack 2
Hotfix - Vault Browser shows "?" on when large assemblies are opened.
Inventor Updated Templates -sheetmetal environments (French Only)
HOTFIX: Network license launch of Inventor Professional does not load stress analysis add-in
Hotfix - Custom library cannot be updated - Failure in update DIN EN 10278 family table
Hotfix - Linetype display
Hotfix - Redundant License Server
Hotfix – Secondary User Windows Start menu launch error
"Object not set to an instance of an Object" error using Plot Manager with IDWs.
Autodesk Mechanical Desktop 2008 Service Pack 1
Hotfix - OptionKey issues on Autodesk Mechanical Desktop 2008
HOTFIX-Editing a Derived Assembly containing iParts will cause Inventor to crash
Autodesk Inventor 2008 Service Pack 1
Hotfix - End of Evaluation Period error during DWGIN
Hotfix - Styles Conflict Error after application of Autodesk® InventorT 2008 Service Pack (French only)
Hotfix - Styles Conflict Error after application of Autodesk® InventorT 2008 Service Pack (Spanish only)
Hotfix - SheetMetal localized template problem (Japanese only)
Hotfix - Mass Properties calculation issue on Autodesk Mechanical Desktop 2008
Hotfix - Resolving Fatal Errors with AcadmEx.arx Failing to Load and Other Issues (Autodesk Inventor Professional 2008)
Hotfix - Cannot Mirror Bend Capabilities from Sheet Metal Flange (German only)
Hotfix - DWF Package Not Viewable in Autodesk Design Review 2008
Task Scheduler DLL Registrations for Autodesk Vault and Productstream 5
Updating the Parker Content Center Library
Hotfix - Hungarian Layout Switching
Hotfix - Vista Group Policy Objects
Hotfix - Inventor DWG Files Opened in AutoCAD 2008 may not Display Annotations
Hotfix - Live Update
Unable to create DWF file when checking in AutoCAD Mechanical DWG file (Polish only)
Hotfix - Drawing Templates (Polish only)
Hotfix - Autodesk Vault/Autodesk Productstream Online PDF (Polish only)
Hotfix - Autodesk Vault/Autodesk Productstream Online PDF (Korean only)
Hotfix - Part and Sheetmetal Templates (German only)
Hotfix - Unable to Use or ADD DWG Files to ADMS 2008
Back to top
Autodesk Inventor® Professional 11 DWF Extension
Hotfix - Table driven assembly does not update as expected
Hotfix - Incorrect hole note is shown
Hotfix - Unable to check in R11_SP4 files to ADMS 2009 server when project file is on a mapped drive
Hotfix - Editing R4 or R6 sheet metal parts in R11 occasionally fails
Hotfix - Failure occurs after moving a Release 11 dimension without a valid reference
Autodesk Inventor 11 Service Pack 4 Client Update for ADMS 2008
Autodesk Inventor 11 Service Pack 4 Client Update for ADMS 2009
Autodesk Inventor® 11 DWF Extension Service Pack 4
Inventor 11 Service Pack 3 Client Upgrade for Autodesk Data Management Server (ADMS) 2009
Productstream Professional 2009 Support for Inventor 11
Hotfix - Inventor Vault Browser Refresh & LOD
Hotfix - Create or Edit Text in IDW Files After Applying Microsoft Hotfix KB918118.
HOTFIX: After installing SP3 some mapped drives are not available in project
Hotfix: Opening file generates a warning "String resource could not be loaded"
HOTFIX: DWF publishing embeds incorrect font
Hotfix: Drawing/Assembly Updates do not trigger a save request in drawing files & Screen diagonally divides in the drawing environment
Inventor loses the connection to the lockfile.lck
HOTFIX-Crash upon export to JT after installing SP3 for DWF Extension
HOTFIX-Assembly features grow IAM file size dramatically
HOTFIX: Copy Engineering Document references not replaced in IDW's containing iPart factories
HOTFIX: Japanese version does not translate parts list properties to Part Reference attributes in DWG
Autodesk Inventor® 11 DWF Extension Service Pack 3
Inventor 11 Service Pack 3 Client Upgrade for Autodesk Data Management Server (ADMS) 2008
Hotfix - Layout Switching (Hungarian only)
Hotfix - Drawing and/or Partslist Substitution Does Not Update
Hotfix - A Shared Project Allows Checked Out Files to be Modified and Saved by Another User & Drawing Crashes Involving Sick Assemblies
Hotfix - Assembly Revolve Creates Bad Cross Database References
Hotfix - Unable to Use the Delete Face Command for Internal Empty Lumps
Hotfix - Cannot Change the Size of Migrated Content Parts
Hotfix - Can't Place a Customer Library Part from Content Center
Hotfix - Save as JT Units are Always in Centimeter
Hotfix - Print DWG Problem: No Option to Turn Off the Parts List and Table
Hotfix - Open Base Component Command Dirties Derived Parts
Hotfix - File Migration Results in Crash of Inventor
Hotfix - Drawing Does Not Update when Changes are Made to the Referenced Files
Hotfix - Performance and Stability Problems During DWF Publishing under DWF Extension
Hotfix - Memory Consumed Rapidly when Exiting a Populated Pipe Run
Hotfix - Instability When Exporting IDW's to DWF
Hotfix - Design Assistant Doesn't Identify What Files Need to be Resolved and a Database ID Error Occurs During a Rename
Autodesk Inventor 11 DWF Extension Service Pack 2
Back to top
Inventor Professional for Simulation 11
Hotfix - OptionKey issues on Autodesk Mechanical Desktop 2007 - Japanese, Traditional Chinese, Simplified Chinese and Korean
Productstream Professional 2009 Support for Inventor 11
Back to top
Inventor Professional for Routed Systems 11
Hotfix - OptionKey issues on Autodesk Mechanical Desktop 2007 - Japanese, Traditional Chinese, Simplified Chinese and Korean
Productstream Professional 2009 Support for Inventor 11
Back to top
Autodesk Inventor® Professional 11
Hotfix - Table driven assembly does not update as expected
Hotfix - Incorrect hole note is shown
Hotfix - Autodesk Activation Update
WAN Acceleration 2007 Hotfix
Hotfix - Unable to check in R11_SP4 files to ADMS 2009 server when project file is on a mapped drive
Hotfix - Editing R4 or R6 sheet metal parts in R11 occasionally fails
Hotfix - Inventor Release 11 mass property values do not get saved into iProperties
Hotfix - Inventor Release 11 IPN file saved as DWF results in error during DWF creation
Hotfix - Failure occurs after moving a Release 11 dimension without a valid reference
Autodesk Inventor 11 Service Pack 4 Client Update for ADMS 2008
Autodesk Inventor® 11 Service Pack 4
Fatal Error Plotting to CAL Format Hotfix
Autodesk Inventor 11 Service Pack 4 Client Update for ADMS 2009
Inventor 11 Service Pack 3 Client Upgrade for Autodesk Data Management Server (ADMS) 2009
Hotfix - OptionKey issues on Autodesk Mechanical Desktop 2007 - Japanese, Traditional Chinese, Simplified Chinese and Korean
Productstream Professional 2009 Support for Inventor 11
Hotfix - Inventor Vault Browser Refresh & LOD
Hotfix - Create or Edit Text in IDW Files After Applying Microsoft Hotfix KB918118.
HOTFIX: After installing SP3 some mapped drives are not available in project
Hotfix: Opening file generates a warning "String resource could not be loaded"
HOTFIX: DWF publishing embeds incorrect font
Hotfix: Drawing/Assembly Updates do not trigger a save request in drawing files & Screen diagonally divides in the drawing environment
Inventor loses the connection to the lockfile.lck
HOTFIX-Assembly features grow IAM file size dramatically
HOTFIX: Copy Engineering Document references not replaced in IDW's containing iPart factories
HOTFIX: Japanese version does not translate parts list properties to Part Reference attributes in DWG
Hotfix - Image Manipulations Improvement
Hotfix - Mass Properties calculation issue on Autodesk Mechanical Desktop 2007
Inventor 11 Service Pack 3 Client Upgrade for Autodesk Data Management Server (ADMS) 2008
Autodesk Inventor® 11 Service Pack 3
Task Scheduler DLL Registrations for Autodesk Vault and Productstream 5
Hotfix - Improve performance for Content Center Libraries in Autodesk Data Management Server 5
Autodesk Mechanical Desktop 2007 Service Pack 2 (Autodesk Inventor Professional for Simulation 11)
Autodesk Mechanical Desktop 2007 Service Pack 2 (Autodesk Inventor Professional for Routed Systems 11)
Autodesk Mechanical Desktop 2007 Service Pack 2 (Autodesk Inventor Professional 11)
Hotfix - Drawing and/or Partslist Substitution Does Not Update
Hotfix - Inventor 10 Presentation Files do not Migrate Correctly to Inventor 11
Hotfix - Allowing Copy Design, Rename and Edit Properties Without File Migration
Hotfix - A Shared Project Allows Checked Out Files to be Modified and Saved by Another User & Drawing Crashes Involving Sick Assemblies
Hotfix - Assembly Revolve Creates Bad Cross Database References
Hotfix 2 for AutoCAD Mechanical 2007 and Mechanical Desktop 2007
Hotfix - Unable to Use the Delete Face Command for Internal Empty Lumps
Hotfix - Cannot Change the Size of Migrated Content Parts
Hotfix - Can't Place a Customer Library Part from Content Center
Hotfix - Deployment Error with Internet Explorer
Hotfix - Open Base Component Command Dirties Derived Parts
Hotfix - File Migration Results in Crash of Inventor
Hotfix - OLE Error
Hotfix - Drawing Does Not Update when Changes are Made to the Referenced Files
Hotfix - Memory Consumed Rapidly when Exiting a Populated Pipe Run
Hotfix - Instability when dragging components
Hotfix - Closing Drawings
Hotfix - Updates to Online Help (Czech Only)
Hotfix - Crash When Using Find and Replace (Polish Only)
Hotfix - Plotting to Raster Files Performance Improvement
Hotfix - Regenerating Drawings Containing Text
Autodesk Mechanical Desktop 2007 Service Pack 1 (Autodesk Inventor Professional 11)
Autodesk Mechanical Desktop 2007 Service Pack 1 (Autodesk Inventor Professional for Simulation 11)
Autodesk Mechanical Desktop 2007 Service Pack 1 (Autodesk Inventor Professional for Routed Systems 11)
Autodesk Inventor 11 Service Pack 2
Hotfix - Design Assistant Doesn't Identify What Files Need to be Resolved and a Database ID Error Occurs During a Rename
Hotfix - DesignData (Spanish only)
Hotfix - DWF Publish Inconsistency with Inventor and EDIT Command
Hotfix - Content Center Filter Performance Improvement
Hotfix - Inventor Crashes When Placing Data from Content Center Via AutoDrop or on Copy Design View to Level of Detail
Hotfix - Rotational Tweaks Disappear on Replay in DWF Viewer
Hotfix - Read/Write Libraries Will Not Migrate When Upgrading to ADMS 5
Hotfix - Cut and Paste
Hotfix - Cannot Place Origin Indicator on Virtual Sharp on Hole Table (Selection Type)
Hotfix - Balloons Attached to Migrated Assembly Views Lose Associativity When Detached and Reattached to Another Component
Hotfix - Unable to Sort Parts List by Part Number Column
Hotfix - Inventor Presentation Files (IPN) Fail to Open or Migrate in Inventor 11
Hotfix - Local Setting "comma as decimal separator" Breaks Ability to Parse Bend Table with Periods
Hotfix - Some Content Center Components are Not Updated After Refreshing Standard Components
Hotfix - Cannot Specify Origin Point for Ordinate Dimension Sets and Cannot Create a Bisector Centerline on Concentric Arcs
Hotfix - Inventor Becomes Unstable when Copying Design View to Level of Detail
Hotfix - Instability When Attempting to Place a New Subassembly into an Existing Assembly
Autodesk Inventor 11 Service Pack 1
Hotfix - Translation Issues in Thread.xls (Polish Only)
Hotfix - Fatal Error During Save
Hotfix - Inventor 11 DWF Extension Needed for Autodesk Design Review 2007 & DWF Viewer 7
Hotfix - DIN hole naming convention (German only)
Hotfix - Sheet metal cut pattern (Italian only)
Hotfix - Performance problems with Autoloader and Design Assistant
Hotfix – Cable and Harness Import (Japanese only)
Hotfix – Cable and Harness Import
SAMreport-Lite Update
Hotfix - Memory leaks when using the Design Assistant
Hotfix - Unable to Install Vault Client when Mechanical Desktop is Installed
Hotfix - Mapped Folders for Content Center files lost after restart
Hotfix - Inventor may stop responding while using Dynamic Simulation
Cable and Harness Help Update
Back to top
Autodesk Mechanical Desktop 2009 (AIP - Routed Systems)
Service Pack 3 Hotfix
Autodesk Mechanical Desktop 2009 Service Pack 3
Autodesk Mechanical Desktop 2009 Service Pack 2
Autodesk Mechanical Desktop 2009 Service Pack 1
Hotfix - Resolving the "Feature Sketch could not be edited in MDT 2009 Russian" issue (Russian only)
Solid Filled Object Hotfix
Multiple Status' in CAD Title Bar - Vault/Productstream 2009
Back to top
Autodesk Mechanical Desktop 2009 (AIP - Simulation)
Service Pack 3 Hotfix
Autodesk Mechanical Desktop 2009 Service Pack 3
Autodesk Mechanical Desktop 2009 Service Pack 2
Autodesk Mechanical Desktop 2009 Service Pack 1
Hotfix - Resolving the "Feature Sketch could not be edited in MDT 2009 Russian" issue (Russian only)
Solid Filled Object Hotfix
Multiple Status' in CAD Title Bar - Vault/Productstream 2009
Back to top
Autodesk Mechanical Desktop 2009 (AIP)
Service Pack 3 Hotfix
Autodesk Mechanical Desktop 2009 Service Pack 3
Autodesk Mechanical Desktop 2009 Service Pack 2
Autodesk Mechanical Desktop 2009 Service Pack 1
Hotfix - Resolving the "Feature Sketch could not be edited in MDT 2009 Russian" issue (Russian only)
Solid Filled Object Hotfix
Multiple Status' in CAD Title Bar - Vault/Productstream 2009
Back to top
Autodesk Mechanical Desktop 2009 (AIS)
Service Pack 3 Hotfix
Autodesk Mechanical Desktop 2009 Service Pack 3
CAD Check In Crash
Autodesk Mechanical Desktop 2009 Service Pack 2
Autodesk Mechanical Desktop 2009 Service Pack 1
Hotfix - Resolving the "Feature Sketch could not be edited in MDT 2009 Russian" issue (Russian only)
Solid Filled Object Hotfix
Multiple Status' in CAD Title Bar - Vault/Productstream 2009
Back to top
Autodesk Mechanical Desktop 2008
Plot to PDF Not Centered With Custom Margins Hotfix
Hotfix - Vault ACAD Addin (cumulative)
Open Failure from Windows Explorer Hotfix
Hotfix – Resolving issues with export of part list to Excel in AutoCAD Mechanical 2008 SP2 and Mechanical Desktop 2008 SP2
Autodesk Mechanical Desktop 2008 Service Pack 2
Multiple Status' in CAD Title Bar - Vault/Productstream 2008
Autodesk Mechanical Desktop 2008 Service Pack 1
Hotfix - OptionKey issues on Autodesk Mechanical Desktop 2008
Hotfix - Mass Properties calculation issue on Autodesk Mechanical Desktop 2008
Hotfix - Resolving Fatal Errors with AcadmEx.arx Failing to Load and Other Issues (Autodesk Inventor Suite 2008)
Hotfix - Resolving Fatal Errors with AcadmEx.arx Failing to Load and Other Issues (Autodesk Inventor Professional 2008)
Hotfix - Resolving Fatal Errors with AcadmEx.arx Failing to Load and Other Issues (Autodesk Inventor Routed Systems Suite 2008)
Hotfix - Resolving Fatal Errors with AcadmEx.arx Failing to Load and Other Issues (Autodesk Inventor Simulation Suite 2008)
Hotfix - Hungarian Layout Switching
Hotfix - Vista Group Policy Objects
Hotfix - Autodesk® idrop 64-bit
Back to top
Autodesk Mechanical Desktop 2008 (AIP - Simulation)
Hotfix - Resolving the "Feature Sketch could not be edited in MDT 2008 Russian" issue (Russian only)
Back to top
Autodesk Mechanical Desktop 2008 (AIP - Routed Systems)
Hotfix - Resolving the "Feature Sketch could not be edited in MDT 2008 Russian" issue (Russian only)
Back to top
Autodesk Mechanical Desktop 2008 (AIP)
Hotfix - Resolving the "Feature Sketch could not be edited in MDT 2008 Russian" issue (Russian only)
Back to top
Autodesk Mechanical Desktop 2008 (AIS)
Hotfix - Resolving the "Feature Sketch could not be edited in MDT 2008 Russian" issue (Russian only)
Back to top
Autodesk® Mechanical Desktop® 2007
Hotfix - Vault ACAD Addin (cumulative)
Fatal Error Plotting to CAL Format Hotfix
Hotfix - OptionKey issues on Autodesk Mechanical Desktop 2007 - Japanese, Traditional Chinese, Simplified Chinese and Korean
Hotfix - Image Manipulations Improvement
Hotfix - Mass Properties calculation issue on Autodesk Mechanical Desktop 2007
Hotfix - Layout Switching (Hungarian only)
Autodesk Mechanical Desktop 2007 Service Pack 2 (Autodesk Inventor Series 11)
Autodesk Mechanical Desktop 2007 Service Pack 2 (Autodesk Inventor Professional for Simulation 11)
Autodesk Mechanical Desktop 2007 Service Pack 2 (Autodesk Inventor Professional for Routed Systems 11)
Autodesk Mechanical Desktop 2007 Service Pack 2 (Autodesk Inventor Professional 11)
Hotfix - Unable to Update AutoCAD Mechanical Attributes
Hotfix 2 for AutoCAD Mechanical 2007 and Mechanical Desktop 2007
Hotfix - Closing Drawings
Hotfix - Updates to Online Help (Czech Only)
Hotfix - Crash When Using Find and Replace (Polish Only)
Hotfix - Plotting to Raster Files Performance Improvement
Hotfix - Regenerating Drawings Containing Text
Autodesk Mechanical Desktop 2007 Service Pack 1 (Autodesk Inventor Series 11)
Autodesk Mechanical Desktop 2007 Service Pack 1 (Autodesk Inventor Professional 11)
Autodesk Mechanical Desktop 2007 Service Pack 1 (Autodesk Inventor Professional for Simulation 11)
Autodesk Mechanical Desktop 2007 Service Pack 1 (Autodesk Inventor Professional for Routed Systems 11)
Hotfix - Thread Migration from MDT to Inventor (French Only)
HotFix – Resolving Fatal Errors and Other Issues
Hotfix - Unable to Install Vault Client when Mechanical Desktop is Installed
Back to top
Autodesk® Mechanical Desktop® 2004
Autodesk Network Installation Wizard Patch
Back to top
Autodesk Factory Design Suite Ultimate 2012
Localization Hotfix - Import Harness Data error (Japanese)
Localization Hotfix for Factory Design Suite 2012 32bit and 64bit - Create\Update DWG and Publish a 2D drawing of the asset
Service Pack 2 for Factory Design Suite 2012
Service Pack 1 for Factory Design Suite 2012
Back to top
Autodesk Factory Design Suite Advanced 2011
Hotfix - Cannot mesh after installing Inventor 2011 SP1 with Factory Design Suite
Update Pack 1 for Autodesk Factory Design Suite 2011
Back to top
Autodesk Factory Design Suite Premium 2012
Localization Hotfix - Import Harness Data error (Japanese)
Localization Hotfix for Factory Design Suite 2012 32bit and 64bit - Create\Update DWG and Publish a 2D drawing of the asset
Service Pack 2 for Factory Design Suite 2012
Service Pack 1 for Factory Design Suite 2012
Back to top
Autodesk Factory Design Suite Premium 2011
Hotfix - Cannot mesh after installing Inventor 2011 SP1 with Factory Design Suite
Update Pack 1 for Autodesk Factory Design Suite 2011
Back to top
