| |
Routed Systems- Interoperability: AutoCAD Electrical and Inventor
Use AutoCAD Electrical and Inventor interoperability to digitally prototype and document your electrical designs (August 2009) - Ribbon Cable: Part 1, Author Ribbon Cable Connectors
Learn how to add pins to and author ribbon cable connectors. (June 2007) - Ribbon Cable: Part 2, Create and Edit Ribbon Cable
Learn how to create and edit ribbon cable. (June 2007) - Ribbon Cable: Part 3, Ribbon Cable Exercise
Hone your ribbon cable skills with this exercise. (June 2007) - Tube & Pipe Styles and Legacy Runs
How to apply Autodesk Inventor 2008 Tube & Pipe styles to legacy runs. (May 2007) - Position a Tee, Cross, or Relevant Fitting Accurately
Use Autodesk Inventor Professional editing tools to make accurate adjustments on rigid route points for positioning fittings. (July 2005) - Tube & Pipe, Authoring, Publishing, and Styles - Part 1
Prepare an iPart factory for a conduit and a fitting. Autodesk Inventor Professional 10 required. (April 2005) - Tube & Pipe, Authoring, Publishing, and Styles – Part 2
Author iParts and parts and publish to the Content Center library. Autodesk Inventor Professional 10 required. (April 2005) - Tube & Pipe, Authoring, Publishing, and Styles – Part 3
Create a custom tube and pipe style using published parts, and then create a pipe route. Autodesk Inventor Professional 10 required. (April 2005) - Cable and Harness Report Generator, R10
Find the answers to your most frequently asked questions along with general tips and a complete property list. (September 2005) - Tube & Pipe: Publishing and Styles
Use Autodesk Inventor Professional Tube & Pipe to create a custom style using published parts. (August 2004) - RefDes
How to use the reference designator value with a Cable and Harness wire list import operation (July 2004)
|
|
|